lkml.org 
[lkml]   [2022]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 05/15] dt-bindings: backlight: Add Mediatek MT6370 backlight
From
On 13/06/2022 04:11, ChiaEn Wu wrote:
> From: ChiYuan Huang <cy_huang@richtek.com>
>
> Add mt6370 backlight binding documentation.
>
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> .../backlight/mediatek,mt6370-backlight.yaml | 107 ++++++++++++++++++
> 1 file changed, 107 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> new file mode 100644
> index 000000000000..25a05e607e83
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> @@ -0,0 +1,107 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6370 Backlight
> +
> +maintainers:
> + - ChiaEn Wu <chiaen_wu@richtek.com>
> +
> +description: |
> + This module is part of the MT6370 MFD device.
> + The MT6370 Backlight WLED driver supports up to a 29V output voltage for
> + 4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
> + capability with 2048 current steps (11 bits) in exponential or linear
> + mapping curves.
> +
> +allOf:
> + - $ref: common.yaml#
> +
> +properties:
> + compatible:
> + const: mediatek,mt6370-backlight
> +
> + default-brightness:
> + minimum: 0
> + maximum: 2048
> +
> + max-brightness:
> + minimum: 0
> + maximum: 2048
> +
> + enable-gpios:
> + description: External backlight 'enable' pin
> + maxItems: 1
> +
> + mediatek,bled-pwm-enable:
> + description: |
> + Enable external PWM input for backlight dimming
> + type: boolean
> +
> + mediatek,bled-pwm-hys-enable:
> + description: |
> + Enable the backlight input-hysteresis for PWM mode
> + type: boolean
> +
> + mediatek,bled-pwm-hys-input-bit:
> + $ref: /schemas/types.yaml#/definitions/uint8
> + enum: [0, 1, 2, 3]
> + description: |
> + The selection of the upper and lower bounds threshold of backlight
> + PWM resolution. If we choose selection 3 (6 bits), the variation of PWM
> + resolution needs over than 64 steps (2^6).
> + value mapping:
> + - 0: 1
> + - 1: 2
> + - 2: 4
> + - 3: 6

Nope, I said last time:
"In any case you cannot have values mapping"

Please use proper real world value, not some register bits. The property
name also needs fixing.

> +
> + mediatek,bled-ovp-shutdown:
> + description: |
> + Enable the backlight shutdown when OVP level triggered
> + type: boolean
> +
> + mediatek,bled-ovp-microvolt:
> + enum: [0, 1, 2, 3]
> + description: |
> + Backlight OVP level selection.
> + value mapping:
> + - 0: 17000000
> + - 1: 21000000
> + - 2: 25000000
> + - 3: 29000000

No. Please test your bindings.

microvolt cannot be 1 mV. It's 21000000, not 1. No value mappings.

> +
> + mediatek,bled-ocp-shutdown:
> + description: |
> + Enable the backlight shutdown when OCP level triggerred.
> + type: boolean
> +
> + mediatek,bled-ocp-microamp:
> + enum: [0, 1, 2, 3]
> + description: |
> + Backlight OC level selection.
> + value mapping:
> + - 0: 900000
> + - 1: 1200000
> + - 2: 1500000
> + - 3: 1800000

Nope.

> +
> + mediatek,bled-channel-use:
> + $ref: /schemas/types.yaml#/definitions/uint8
> + description: |
> + Backlight LED channel to be used.
> + Each bit mapping to:
> + - 0: CH4
> + - 1: CH3
> + - 2: CH2
> + - 3: CH1
> + minimum: 1
> + maximum: 15
> +
> +required:
> + - compatible
> + - mediatek,bled-channel-use
> +
> +additionalProperties: false


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-06-16 23:14    [W:0.296 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site