lkml.org 
[lkml]   [2022]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/3] mtd: nand: raw: qcom_nandc: reorder qcom_nand_host struct
On Thu, Jun 16, 2022 at 02:18:08AM +0200, Ansuel Smith wrote:
> On Wed, Jun 15, 2022 at 10:41:32PM +0530, Manivannan Sadhasivam wrote:
> > On Wed, Jun 15, 2022 at 02:06:10AM +0200, Ansuel Smith wrote:
> > > Reorder structs in nandc driver to save holes.
> > >
> > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> >
> > Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
> >
> > Thanks,
> > Mani
> >
>
> I'm sending v8 with a different Sob so I'm not adding the review tag (in
> v8).
> In short the new Sob is what I will use onwards, wanted to keep the
> Ansuel reference but it was suggested to use Christian Marangi and
> nothing more. It's just a name change and we are the same person and
> nobody is stealing ownership of the patch.
> Sorry for the mess.
>

That's fine but you could've kept the review tags... Anyway, I'll give mine.

Thanks,
Mani

> > > ---
> > > drivers/mtd/nand/raw/qcom_nandc.c | 107 +++++++++++++++++-------------
> > > 1 file changed, 62 insertions(+), 45 deletions(-)
> > >
> > > diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> > > index 1a77542c6d67..f2990d721733 100644
> > > --- a/drivers/mtd/nand/raw/qcom_nandc.c
> > > +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> > > @@ -238,6 +238,9 @@ nandc_set_reg(chip, reg, \
> > > * @bam_ce - the array of BAM command elements
> > > * @cmd_sgl - sgl for NAND BAM command pipe
> > > * @data_sgl - sgl for NAND BAM consumer/producer pipe
> > > + * @last_data_desc - last DMA desc in data channel (tx/rx).
> > > + * @last_cmd_desc - last DMA desc in command channel.
> > > + * @txn_done - completion for NAND transfer.
> > > * @bam_ce_pos - the index in bam_ce which is available for next sgl
> > > * @bam_ce_start - the index in bam_ce which marks the start position ce
> > > * for current sgl. It will be used for size calculation
> > > @@ -250,14 +253,14 @@ nandc_set_reg(chip, reg, \
> > > * @rx_sgl_start - start index in data sgl for rx.
> > > * @wait_second_completion - wait for second DMA desc completion before making
> > > * the NAND transfer completion.
> > > - * @txn_done - completion for NAND transfer.
> > > - * @last_data_desc - last DMA desc in data channel (tx/rx).
> > > - * @last_cmd_desc - last DMA desc in command channel.
> > > */
> > > struct bam_transaction {
> > > struct bam_cmd_element *bam_ce;
> > > struct scatterlist *cmd_sgl;
> > > struct scatterlist *data_sgl;
> > > + struct dma_async_tx_descriptor *last_data_desc;
> > > + struct dma_async_tx_descriptor *last_cmd_desc;
> > > + struct completion txn_done;
> > > u32 bam_ce_pos;
> > > u32 bam_ce_start;
> > > u32 cmd_sgl_pos;
> > > @@ -267,25 +270,23 @@ struct bam_transaction {
> > > u32 rx_sgl_pos;
> > > u32 rx_sgl_start;
> > > bool wait_second_completion;
> > > - struct completion txn_done;
> > > - struct dma_async_tx_descriptor *last_data_desc;
> > > - struct dma_async_tx_descriptor *last_cmd_desc;
> > > };
> > >
> > > /*
> > > * This data type corresponds to the nand dma descriptor
> > > + * @dma_desc - low level DMA engine descriptor
> > > * @list - list for desc_info
> > > - * @dir - DMA transfer direction
> > > + *
> > > * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by
> > > * ADM
> > > * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM
> > > * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM
> > > - * @dma_desc - low level DMA engine descriptor
> > > + * @dir - DMA transfer direction
> > > */
> > > struct desc_info {
> > > + struct dma_async_tx_descriptor *dma_desc;
> > > struct list_head node;
> > >
> > > - enum dma_data_direction dir;
> > > union {
> > > struct scatterlist adm_sgl;
> > > struct {
> > > @@ -293,7 +294,7 @@ struct desc_info {
> > > int sgl_cnt;
> > > };
> > > };
> > > - struct dma_async_tx_descriptor *dma_desc;
> > > + enum dma_data_direction dir;
> > > };
> > >
> > > /*
> > > @@ -337,52 +338,64 @@ struct nandc_regs {
> > > /*
> > > * NAND controller data struct
> > > *
> > > - * @controller: base controller structure
> > > - * @host_list: list containing all the chips attached to the
> > > - * controller
> > > * @dev: parent device
> > > + *
> > > * @base: MMIO base
> > > - * @base_phys: physical base address of controller registers
> > > - * @base_dma: dma base address of controller registers
> > > + *
> > > * @core_clk: controller clock
> > > * @aon_clk: another controller clock
> > > *
> > > + * @regs: a contiguous chunk of memory for DMA register
> > > + * writes. contains the register values to be
> > > + * written to controller
> > > + *
> > > + * @props: properties of current NAND controller,
> > > + * initialized via DT match data
> > > + *
> > > + * @controller: base controller structure
> > > + * @host_list: list containing all the chips attached to the
> > > + * controller
> > > + *
> > > * @chan: dma channel
> > > * @cmd_crci: ADM DMA CRCI for command flow control
> > > * @data_crci: ADM DMA CRCI for data flow control
> > > + *
> > > * @desc_list: DMA descriptor list (list of desc_infos)
> > > *
> > > * @data_buffer: our local DMA buffer for page read/writes,
> > > * used when we can't use the buffer provided
> > > * by upper layers directly
> > > - * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
> > > - * functions
> > > * @reg_read_buf: local buffer for reading back registers via DMA
> > > + *
> > > + * @base_phys: physical base address of controller registers
> > > + * @base_dma: dma base address of controller registers
> > > * @reg_read_dma: contains dma address for register read buffer
> > > - * @reg_read_pos: marker for data read in reg_read_buf
> > > *
> > > - * @regs: a contiguous chunk of memory for DMA register
> > > - * writes. contains the register values to be
> > > - * written to controller
> > > - * @cmd1/vld: some fixed controller register values
> > > - * @props: properties of current NAND controller,
> > > - * initialized via DT match data
> > > + * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
> > > + * functions
> > > * @max_cwperpage: maximum QPIC codewords required. calculated
> > > * from all connected NAND devices pagesize
> > > + *
> > > + * @reg_read_pos: marker for data read in reg_read_buf
> > > + *
> > > + * @cmd1/vld: some fixed controller register values
> > > */
> > > struct qcom_nand_controller {
> > > - struct nand_controller controller;
> > > - struct list_head host_list;
> > > -
> > > struct device *dev;
> > >
> > > void __iomem *base;
> > > - phys_addr_t base_phys;
> > > - dma_addr_t base_dma;
> > >
> > > struct clk *core_clk;
> > > struct clk *aon_clk;
> > >
> > > + struct nandc_regs *regs;
> > > + struct bam_transaction *bam_txn;
> > > +
> > > + const struct qcom_nandc_props *props;
> > > +
> > > + struct nand_controller controller;
> > > + struct list_head host_list;
> > > +
> > > union {
> > > /* will be used only by QPIC for BAM DMA */
> > > struct {
> > > @@ -400,22 +413,22 @@ struct qcom_nand_controller {
> > > };
> > >
> > > struct list_head desc_list;
> > > - struct bam_transaction *bam_txn;
> > >
> > > u8 *data_buffer;
> > > + __le32 *reg_read_buf;
> > > +
> > > + phys_addr_t base_phys;
> > > + dma_addr_t base_dma;
> > > + dma_addr_t reg_read_dma;
> > > +
> > > int buf_size;
> > > int buf_count;
> > > int buf_start;
> > > unsigned int max_cwperpage;
> > >
> > > - __le32 *reg_read_buf;
> > > - dma_addr_t reg_read_dma;
> > > int reg_read_pos;
> > >
> > > - struct nandc_regs *regs;
> > > -
> > > u32 cmd1, vld;
> > > - const struct qcom_nandc_props *props;
> > > };
> > >
> > > /*
> > > @@ -431,19 +444,21 @@ struct qcom_nand_controller {
> > > * and reserved bytes
> > > * @cw_data: the number of bytes within a codeword protected
> > > * by ECC
> > > - * @use_ecc: request the controller to use ECC for the
> > > - * upcoming read/write
> > > - * @bch_enabled: flag to tell whether BCH ECC mode is used
> > > * @ecc_bytes_hw: ECC bytes used by controller hardware for this
> > > * chip
> > > - * @status: value to be returned if NAND_CMD_STATUS command
> > > - * is executed
> > > + *
> > > * @last_command: keeps track of last command on this chip. used
> > > * for reading correct status
> > > *
> > > * @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for
> > > * ecc/non-ecc mode for the current nand flash
> > > * device
> > > + *
> > > + * @status: value to be returned if NAND_CMD_STATUS command
> > > + * is executed
> > > + * @use_ecc: request the controller to use ECC for the
> > > + * upcoming read/write
> > > + * @bch_enabled: flag to tell whether BCH ECC mode is used
> > > */
> > > struct qcom_nand_host {
> > > struct nand_chip chip;
> > > @@ -452,12 +467,10 @@ struct qcom_nand_host {
> > > int cs;
> > > int cw_size;
> > > int cw_data;
> > > - bool use_ecc;
> > > - bool bch_enabled;
> > > int ecc_bytes_hw;
> > > int spare_bytes;
> > > int bbm_size;
> > > - u8 status;
> > > +
> > > int last_command;
> > >
> > > u32 cfg0, cfg1;
> > > @@ -466,23 +479,27 @@ struct qcom_nand_host {
> > > u32 ecc_bch_cfg;
> > > u32 clrflashstatus;
> > > u32 clrreadstatus;
> > > +
> > > + u8 status;
> > > + bool use_ecc;
> > > + bool bch_enabled;
> > > };
> > >
> > > /*
> > > * This data type corresponds to the NAND controller properties which varies
> > > * among different NAND controllers.
> > > * @ecc_modes - ecc mode for NAND
> > > + * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
> > > * @is_bam - whether NAND controller is using BAM
> > > * @is_qpic - whether NAND CTRL is part of qpic IP
> > > * @qpic_v2 - flag to indicate QPIC IP version 2
> > > - * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
> > > */
> > > struct qcom_nandc_props {
> > > u32 ecc_modes;
> > > + u32 dev_cmd_reg_start;
> > > bool is_bam;
> > > bool is_qpic;
> > > bool qpic_v2;
> > > - u32 dev_cmd_reg_start;
> > > };
> > >
> > > /* Frees the BAM transaction memory */
> > > --
> > > 2.36.1
> > >
> >
> > --
> > மணிவண்ணன் சதாசிவம்
>
> --
> Ansuel

--
மணிவண்ணன் சதாசிவம்

\
 
 \ /
  Last update: 2022-06-16 22:29    [W:0.080 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site