lkml.org 
[lkml]   [2022]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/2] dt-bindings: mailbox: imx-mu: add RST channel
Date
From: Peng Fan <peng.fan@nxp.com>

i.MX MU has a MUR bit which is to reset both the Processor B and the
Processor A sides of the MU module, forcing all control and status
registers to return to their default values (except the BHR bit in the ACR
register and BHRM bit in BCR register), and all internal states to be
cleared.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/mailbox/fsl,mu.yaml | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
index 7a86e7926dd2..191c1ce15009 100644
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -72,14 +72,16 @@ properties:
type : Channel type
channel : Channel number

- This MU support 4 type of unidirectional channels, each type
- has 4 channels. A total of 16 channels. Following types are
+ This MU support 5 type of unidirectional channels, each type
+ has 4 channels except RST channel which only has 1 channel.
+ A total of 17 channels. Following types are
supported:
0 - TX channel with 32bit transmit register and IRQ transmit
acknowledgment support.
1 - RX channel with 32bit receive register and IRQ support
2 - TX doorbell channel. Without own register and no ACK support.
3 - RX doorbell channel.
+ 4 - RST channel
const: 2

clocks:
--
2.25.1
\
 
 \ /
  Last update: 2022-06-15 15:00    [W:1.291 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site