lkml.org 
[lkml]   [2022]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 2/2] mailbox: imx: support RST channel
Date
From: Peng Fan <peng.fan@nxp.com>

i.MX generic MU supports MU-A/B reset feature.

When stop/start remotecore, MU is not reset. So when Linux stop
remotecore, the MU-B side BCR may contain valid configuration,
because MU-B is not reset. So when linux start Mcore
again and notify Mcore, Mcore is not ready to handle MU interrupt
and cause issues. So need reset MU when stop Mcore.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/mailbox/imx-mailbox.c | 29 +++++++++++++++++++++++------
1 file changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
index b10239d6ef93..37fc765783f8 100644
--- a/drivers/mailbox/imx-mailbox.c
+++ b/drivers/mailbox/imx-mailbox.c
@@ -19,7 +19,7 @@
#include <linux/suspend.h>
#include <linux/slab.h>

-#define IMX_MU_CHANS 16
+#define IMX_MU_CHANS 17
/* TX0/RX0/RXDB[0-3] */
#define IMX_MU_SCU_CHANS 6
/* TX0/RX0 */
@@ -35,9 +35,11 @@ enum imx_mu_chan_type {
IMX_MU_TYPE_RX = 1, /* Rx */
IMX_MU_TYPE_TXDB = 2, /* Tx doorbell */
IMX_MU_TYPE_RXDB = 3, /* Rx doorbell */
+ IMX_MU_TYPE_RST = 4, /* Reset */
};

enum imx_mu_xcr {
+ IMX_MU_CR,
IMX_MU_GIER,
IMX_MU_GCR,
IMX_MU_TCR,
@@ -50,6 +52,7 @@ enum imx_mu_xsr {
IMX_MU_GSR,
IMX_MU_TSR,
IMX_MU_RSR,
+ IMX_MU_xSR_MAX,
};

struct imx_sc_rpc_msg_max {
@@ -85,7 +88,7 @@ struct imx_mu_priv {
int irq[IMX_MU_CHANS];
bool suspend;

- u32 xcr[4];
+ u32 xcr[IMX_MU_xCR_MAX];

bool side_b;
};
@@ -105,8 +108,8 @@ struct imx_mu_dcfg {
enum imx_mu_type type;
u32 xTR; /* Transmit Register0 */
u32 xRR; /* Receive Register0 */
- u32 xSR[4]; /* Status Registers */
- u32 xCR[4]; /* Control Registers */
+ u32 xSR[IMX_MU_xSR_MAX]; /* Status Registers */
+ u32 xCR[IMX_MU_xCR_MAX]; /* Control Registers */
};

#define IMX_MU_xSR_GIPn(type, x) (type & IMX_MU_V2 ? BIT(x) : BIT(28 + (3 - (x))))
@@ -121,6 +124,9 @@ struct imx_mu_dcfg {
#define IMX_MU_xCR_TIEn(type, x) (type & IMX_MU_V2 ? BIT(x) : BIT(20 + (3 - (x))))
/* General Purpose Interrupt Request */
#define IMX_MU_xCR_GIRn(type, x) (type & IMX_MU_V2 ? BIT(x) : BIT(16 + (3 - (x))))
+/* MU reset */
+#define IMX_MU_xCR_RST(type) (type & IMX_MU_V2 ? BIT(0) : BIT(5))
+#define IMX_MU_xSR_RST(type) (type & IMX_MU_V2 ? BIT(0) : BIT(7))


static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller *mbox)
@@ -497,6 +503,8 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
val &= IMX_MU_xSR_GIPn(priv->dcfg->type, cp->idx) &
(ctrl & IMX_MU_xCR_GIEn(priv->dcfg->type, cp->idx));
break;
+ case IMX_MU_TYPE_RST:
+ return IRQ_NONE;
default:
dev_warn_ratelimited(priv->dev, "Unhandled channel type %d\n",
cp->type);
@@ -581,6 +589,8 @@ static void imx_mu_shutdown(struct mbox_chan *chan)
{
struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
struct imx_mu_con_priv *cp = chan->con_priv;
+ int ret;
+ u32 sr;

if (cp->type == IMX_MU_TYPE_TXDB) {
tasklet_kill(&cp->txdb_tasklet);
@@ -598,6 +608,13 @@ static void imx_mu_shutdown(struct mbox_chan *chan)
case IMX_MU_TYPE_RXDB:
imx_mu_xcr_rmw(priv, IMX_MU_GIER, 0, IMX_MU_xCR_GIEn(priv->dcfg->type, cp->idx));
break;
+ case IMX_MU_TYPE_RST:
+ imx_mu_xcr_rmw(priv, IMX_MU_CR, IMX_MU_xCR_RST(priv->dcfg->type), 0);
+ ret = readl_poll_timeout(priv->base + priv->dcfg->xSR[IMX_MU_SR], sr,
+ !(sr & IMX_MU_xSR_RST(priv->dcfg->type)), 1, 5);
+ if (ret)
+ dev_warn(priv->dev, "RST channel timeout\n");
+ break;
default:
break;
}
@@ -865,7 +882,7 @@ static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
.xTR = 0x0,
.xRR = 0x10,
.xSR = {0x20, 0x20, 0x20, 0x20},
- .xCR = {0x24, 0x24, 0x24, 0x24},
+ .xCR = {0x24, 0x24, 0x24, 0x24, 0x24},
};

static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
@@ -888,7 +905,7 @@ static const struct imx_mu_dcfg imx_mu_cfg_imx8ulp = {
.xTR = 0x200,
.xRR = 0x280,
.xSR = {0xC, 0x118, 0x124, 0x12C},
- .xCR = {0x110, 0x114, 0x120, 0x128},
+ .xCR = {0x8, 0x110, 0x114, 0x120, 0x128},
};

static const struct imx_mu_dcfg imx_mu_cfg_imx8ulp_s4 = {
--
2.25.1
\
 
 \ /
  Last update: 2022-06-15 15:00    [W:0.931 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site