lkml.org 
[lkml]   [2022]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] nvme: Report model,sn,fw,pci device information during init
On Wed, Jun 15, 2022 at 09:57:05AM +0200, Erwan Velu wrote:
> > I would much prefer to not print it all. The Linux boot is way to spammy
> > to start with and this doesn't add any real value.
> >
>
> I know the boot is a bit spammy but when systems crash because of nvme
> drives, that's very handy to get a trace showing who was the culprit and
> what drive is installed (including the fw version which is usually a major
> source of troubles).

Well, usually they are all the same or a very small set of different
SKUs compared to the total number of drives.

\
 
 \ /
  Last update: 2022-06-15 12:54    [W:0.046 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site