lkml.org 
[lkml]   [2022]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: spi-nor: handle unsupported FSR opcodes properly
Hi,

On Tue, Jun 14, 2022 at 05:56:54PM +0000, Oleksandr Ocheretnyi -X (oocheret - GLOBALLOGIC INC at Cisco) wrote:
> Hello Mika,
>
> in my case (I work with memory chip n25q128a13 for recent kernels) I'm
> getting return value -ENOTSUPP from spi_mem_exec_op() call in the
> micron_st_nor_read_fsr() method
> [[1]https://elixir.bootlin.com/linux/v5.19-rc2/source/drivers/spi/spi-m
> em.c#L326]. So I decided to provide the same errorcode to
> intel_spi_hw_cycle() method because older kernel versions throw the
> error there. It is fine to use -EOPNOTSUPP return value instead.
>
> I suspect we need to cover both cases to check -ENOTSUPP as well as
> -EOPNOTSUPP to let the driver work properly.
>
> if (ret == -ENOTSUPP || ret == -EOPNOTSUPP)

I think we should follow the same in the Intel driver and return
-ENOTSUPP too.

\
 
 \ /
  Last update: 2022-06-15 11:51    [W:0.053 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site