lkml.org 
[lkml]   [2022]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema
Date
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. at91-sam9x60ek.dts, at91-sama5d27_wlsom1_ek.dts,
at91-sama5d2_icp.dts: different names according to discussion.
---
arch/arm/boot/dts/at91-foxg20.dts | 4 ++--
arch/arm/boot/dts/at91-gatwick.dts | 2 +-
arch/arm/boot/dts/at91-kizbox.dts | 6 +++---
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 8 ++++----
arch/arm/boot/dts/at91-kizbox3-hs.dts | 12 ++++++------
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 4 ++--
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
arch/arm/boot/dts/at91-qil_a9260.dts | 2 +-
arch/arm/boot/dts/at91-sam9x60ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d2_icp.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d4ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama7g5ek.dts | 4 ++--
arch/arm/boot/dts/at91-wb45n.dts | 2 +-
arch/arm/boot/dts/at91-wb50n.dts | 2 +-
arch/arm/boot/dts/at91sam9260ek.dts | 6 +++---
arch/arm/boot/dts/at91sam9261ek.dts | 10 +++++-----
arch/arm/boot/dts/at91sam9263ek.dts | 6 +++---
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 +++---
.../dts/at91sam9g25-gardena-smart-gateway.dts | 2 +-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 16 ++++++++--------
arch/arm/boot/dts/at91sam9n12ek.dts | 4 ++--
arch/arm/boot/dts/at91sam9rlek.dts | 6 +++---
28 files changed, 70 insertions(+), 70 deletions(-)

diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index 7edf057047f8..9dfd5de808d1 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -155,10 +155,10 @@ user_led {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

- btn {
+ button {
label = "Button";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
index 5a81cab5fc3a..2c718cf84d7b 100644
--- a/arch/arm/boot/dts/at91-gatwick.dts
+++ b/arch/arm/boot/dts/at91-gatwick.dts
@@ -13,7 +13,7 @@ / {
model = "Laird Workgroup Bridge 50N - Project Gatwick";
compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;

diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 3b8812fcd854..87e972eb2ba6 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -28,19 +28,19 @@ main_xtal {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;

- reset {
+ button-reset {
label = "PB_RST";
gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
wakeup-source;
};

- user {
+ button-user {
label = "PB_USER";
gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index c08834ddf07b..ed7146e23147 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -31,26 +31,26 @@ main_xtal {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;

- prog {
+ button-prog {
label = "PB_PROG";
gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};

- reset {
+ button-reset {
label = "PB_RST";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
wakeup-source;
};

- user {
+ button-user {
label = "PB_USER";
gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 2799b2a1f4d2..f76e2e0b41ae 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -55,7 +55,7 @@ led-6 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default" , "default", "default",
"default", "default" ;
@@ -68,35 +68,35 @@ &pinctrl_pio_io_reset
&pinctrl_pio_zbe_rst>;
pinctrl-4 = <&pinctrl_pio_input>;

- SW1 {
+ switch-1 {
label = "SW1";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <0x101>;
wakeup-source;
};

- SW2 {
+ switch-2 {
label = "SW2";
gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};

- SW3 {
+ switch-3 {
label = "SW3";
gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};

- SW7 {
+ switch-7 {
label = "SW7";
gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
linux,code = <0x107>;
wakeup-source;
};

- SW8 {
+ switch-8 {
label = "SW8";
gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
linux,code = <0x108>;
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index 9c622892c692..8fb08e6fad7a 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -39,14 +39,14 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;

- prog {
+ key-prog {
label = "PB_PROG";
gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};

- reset {
+ key-reset {
label = "PB_RST";
gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 4f123477e631..f71377c9b757 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -18,7 +18,7 @@ / {
gpio-keys {
compatible = "gpio-keys";

- wakeup {
+ key-wakeup {
label = "Wakeup";
linux,code = <10>;
wakeup-source;
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 969d990767fc..d09b3d15a828 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -201,7 +201,7 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;

- user_pb {
+ button-user {
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 7719ea3d4933..838353a42097 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -76,13 +76,13 @@ vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
status = "okay";

- sw1 {
+ button-1 {
label = "SW1";
gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
linux,code=<KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 08f0d4b995ff..96c9290007a8 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -478,13 +478,13 @@ can1: can@fc050000 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;

- pb4 {
+ button {
label = "USER";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 5e8755f22784..b55e8fb113b1 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -26,14 +26,14 @@ chosen {
stdout-path = "serial0:115200n8";
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
status = "okay";

- sw4 {
+ button-1 {
label = "USER BUTTON";
gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 806eb1d911d7..38f0e1ae6ae6 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -42,14 +42,14 @@ main_xtal {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
status = "okay";

- sw4 {
+ button-1 {
label = "USER_PB1";
gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 8ed58af01391..544c64549459 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -394,13 +394,13 @@ pinctrl_usba_vbus: usba_vbus {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;

- bp1 {
+ button-1 {
label = "PB_USER";
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index cdfe891f9a9e..6799c2f475b2 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -703,13 +703,13 @@ can1: can@fc050000 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;

- bp1 {
+ button {
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index a49c2966b41e..1f42a6a981bf 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -372,13 +372,13 @@ vcc_mmc0_reg: fixedregulator_mmc0 {
regulator-always-on;
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;

- bp3 {
+ button {
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index e519d2747936..f122f302f8e0 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -242,13 +242,13 @@ rootfs@800000 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;

- pb_user1 {
+ button {
label = "pb_user1";
gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 7017f626f362..fce4e93c6bee 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -269,13 +269,13 @@ rootfs@800000 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;

- pb_user1 {
+ button {
label = "pb_user1";
gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index 103544620fd7..de44da2e4aae 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -45,13 +45,13 @@ main_xtal {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;

- bp1 {
+ button {
label = "PB_USER";
gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
index 54d130c92185..3e46b29412d1 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -12,7 +12,7 @@ / {
model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index 89f0f717f7ed..e2195bd3e4b4 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -13,7 +13,7 @@ / {
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index 6381088ba24f..bb72f050a4fe 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -144,17 +144,17 @@ nand0: nand@40000000 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

- btn3 {
+ button-3 {
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};

- btn4 {
+ button-4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 6fb4fe49cf1c..88869ca874d1 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -211,31 +211,31 @@ ds1 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

- button_0 {
+ button-0 {
label = "button_0";
gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
linux,code = <256>;
wakeup-source;
};

- button_1 {
+ button-1 {
label = "button_1";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <257>;
wakeup-source;
};

- button_2 {
+ button-2 {
label = "button_2";
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
linux,code = <258>;
wakeup-source;
};

- button_3 {
+ button-3 {
label = "button_3";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <259>;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index e732565913a4..ce8baff6a9f4 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -232,17 +232,17 @@ d2 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>;
wakeup-source;
};

- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 85c17dd1c8d5..60d61291f344 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -234,17 +234,17 @@ wm8731: wm8731@1b {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

- btn3 {
+ button-3 {
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};

- btn4 {
+ button-4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
index 7da70aeeb528..92f2c05c873f 100644
--- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
@@ -23,7 +23,7 @@ aliases {
gpio-keys {
compatible = "gpio-keys";

- user_btn1 {
+ button {
label = "USER_BTN1";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index e5db198a87a8..7f45e81ca165 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -343,48 +343,48 @@ led-3 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>;
wakeup-source;
};

- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>;
wakeup-source;
};

- left {
+ button-left {
label = "Joystick Left";
gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
linux,code = <105>;
};

- right {
+ button-right {
label = "Joystick Right";
gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
linux,code = <106>;
};

- up {
+ button-up {
label = "Joystick Up";
gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
linux,code = <103>;
};

- down {
+ button-down {
label = "Joystick Down";
gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
linux,code = <108>;
};

- enter {
+ button-enter {
label = "Joystick Press";
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index c905d7bfc771..4c644d4c6be7 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -226,10 +226,10 @@ d10 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

- enter {
+ button-enter {
label = "Enter";
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index ddaadfec6751..a57351270551 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -248,17 +248,17 @@ led-3 {
};
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,code = <273>;
wakeup-source;
};

- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,code = <272>;
--
2.34.1
\
 
 \ /
  Last update: 2022-06-16 02:58    [W:0.300 / U:2.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site