lkml.org 
[lkml]   [2022]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 06/40] arm64: dts: broadcom: align gpio-key node names with dtschema
    Date
    The node names should be generic and DT schema expects certain pattern
    (e.g. with key/button/switch).

    Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    ---
    .../broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 8 ++++----
    .../boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 8 ++++----
    2 files changed, 8 insertions(+), 8 deletions(-)

    diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
    index b63eefab48bd..064f7f549665 100644
    --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
    +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
    @@ -83,25 +83,25 @@ gpio-keys-polled {
    compatible = "gpio-keys-polled";
    poll-interval = <100>;

    - brightness {
    + key-brightness {
    label = "LEDs";
    linux,code = <KEY_BRIGHTNESS_ZERO>;
    gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
    };

    - wps {
    + key-wps {
    label = "WPS";
    linux,code = <KEY_WPS_BUTTON>;
    gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
    };

    - wifi {
    + key-wifi {
    label = "WiFi";
    linux,code = <KEY_RFKILL>;
    gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
    };

    - restart {
    + key-restart {
    label = "Reset";
    linux,code = <KEY_RESTART>;
    gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
    diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
    index 169fbb7cfd34..04f8524b5335 100644
    --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
    +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
    @@ -18,25 +18,25 @@ gpio-keys-polled {
    compatible = "gpio-keys-polled";
    poll-interval = <100>;

    - wifi {
    + key-wifi {
    label = "WiFi";
    linux,code = <KEY_RFKILL>;
    gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
    };

    - wps {
    + key-wps {
    label = "WPS";
    linux,code = <KEY_WPS_BUTTON>;
    gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
    };

    - restart {
    + key-restart {
    label = "Reset";
    linux,code = <KEY_RESTART>;
    gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
    };

    - brightness {
    + key-brightness {
    label = "LEDs";
    linux,code = <KEY_BRIGHTNESS_ZERO>;
    gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
    --
    2.34.1
    \
     
     \ /
      Last update: 2022-06-16 02:57    [W:5.351 / U:1.692 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site