lkml.org 
[lkml]   [2022]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] mm/swapfile: release swap info when swap device is unpluged
Date
When the swap partition is mounted through the swapon command,
the kernel will create the swap_info_struct data structure
and initialize it, and save it in the swap_info global array.
When the swap partition is no longer in use, the disk is
unloaded through the swapoff command.

However, if the disk is pulled out after swapon, an error will
occur when swapoff the disk, causing the swap_info_struct
data structure to remain in the kernel and cannot be cleared.

This patch identifies which disks are no longer available
by adding a traversal operation for swap_active_head available
swap partitions in the swapon and swapoff processes,
so as to clear the above data structures and
release the corresponding resources.

Example:
[root@localhost ~]# swapon -s
[root@localhost ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 1.1T 0 disk
├─sda1 8:1 0 600M 0 part /boot/efi
├─sda2 8:2 0 1G 0 part /boot
└─sda3 8:3 0 1.1T 0 part
├─root 253:0 0 70G 0 lvm /
├─swap 253:1 0 4G 0 lvm
└─home 253:2 0 1T 0 lvm /home
nvme0n1 259:0 0 3.6T 0 disk
└─nvme0n1p1 259:5 0 60G 0 part
[root@localhost ~]# swapon /dev/nvme0n1p1
[root@localhost ~]# swapon -s
Filename Type Size Used Priority
/dev/nvme0n1p1 partition 62914556 0 -2
[root@localhost ~]# echo 1 > /sys/bus/pci/devices/0000:d8:00.0/remove
[root@localhost ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 1.1T 0 disk
├─sda1 8:1 0 600M 0 part /boot/efi
├─sda2 8:2 0 1G 0 part /boot
└─sda3 8:3 0 1.1T 0 part
├─root 253:0 0 70G 0 lvm /
├─swap 253:1 0 4G 0 lvm
└─home 253:2 0 1T 0 lvm /home
[root@localhost ~]# swapon -s
Filename Type Size Used Priority
/dev/nvme0n1p1 partition 62914556 0 -2
[root@localhost ~]# swapoff /dev/nvme0n1p1
swapoff: /dev/nvme0n1p1: swapoff failed: No such file or directory
[root@localhost ~]# swapoff -a
[root@localhost ~]# swapon -s
Filename Type Size Used Priority
/dev/nvme0n1p1 partition 62914556 0 -2

In the swapoff command, the device is acquired in the following ways,
but the device has been unplugged at this time, causing the "victim"
acquisition to fail, thus returning an error directly.
And the invalid swap_info_struct cannot be effectively released.

pathname = getname(specialfile);
if (IS_ERR(pathname))
return PTR_ERR(pathname);

victim = file_open_name(pathname, O_RDWR|O_LARGEFILE, 0);
err = PTR_ERR(victim);
if (IS_ERR(victim))
goto out;

In order to solve the above problems, by adding traversal of
swap_avail_heads (available swap partitions) in the swapoff
and swapon processes,
find the swap_info_struct whose disk partition has been
unplugged, and release resources.

The reason why the judgment of unavailable swap information is also
added to the swapon process is that the swapoff is executed by the
user, and the timing is uncontrollable.
The system supports swapon multiple disks, and the unavailable swap
can be deleted at the same time as swapon is mounted.

Signed-off-by: liubo <liubo254@huawei.com>
---
v2:
The possible solution to the problem that the swap resources
are not released when the swap partition is hot-pluged.
The actual fix of the former patch.

Former:https://lore.kernel.org/linux-mm/20220528084941.28391-1-liubo254@huawei.com/
---
mm/swapfile.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 92 insertions(+), 1 deletion(-)

diff --git a/mm/swapfile.c b/mm/swapfile.c
index 2ef5e7b4918e..91208de9f689 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -68,6 +68,7 @@ static const char Bad_file[] = "Bad swap file entry ";
static const char Unused_file[] = "Unused swap file entry ";
static const char Bad_offset[] = "Bad swap offset entry ";
static const char Unused_offset[] = "Unused swap offset entry ";
+static const char invalid_info[] = "deleted";

/*
* all active swap_info_structs
@@ -2476,6 +2477,88 @@ static void del_useless_swap_info(struct swap_info_struct *p)
spin_unlock(&p->lock);
}

+static int swapoff_invalid_swapinfo(void)
+{
+ struct swap_info_struct *p = NULL;
+ struct file *swap_file;
+ int err, found = 0;
+
+ char *tmp = NULL;
+ char *swap_name = NULL;
+
+ tmp = kvzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+rescan:
+ memset(tmp, 0, PAGE_SIZE);
+ spin_lock(&swap_lock);
+ plist_for_each_entry(p, &swap_active_head, list) {
+ if (p->flags & SWP_WRITEOK) {
+ swap_file = p->swap_file;
+ swap_name = d_path(&swap_file->f_path, tmp, PAGE_SIZE);
+
+ if (strstr(swap_name, invalid_info)) {
+ found = 1;
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ err = 0;
+ spin_unlock(&swap_lock);
+ goto out;
+ }
+
+ total_swap_pages -= p->pages;
+
+ del_useless_swap_info(p);
+ spin_unlock(&swap_lock);
+
+ disable_swap_slots_cache_lock();
+ set_current_oom_origin();
+ try_to_unuse(p->type);
+ clear_current_oom_origin();
+
+ reenable_swap_slots_cache_unlock();
+
+ /*
+ * wait for swap operations protected by get/put_swap_device()
+ * to complete
+ */
+ synchronize_rcu();
+
+ flush_work(&p->discard_work);
+
+ destroy_swap_extents(p);
+ if (p->flags & SWP_CONTINUED)
+ free_swap_count_continuations(p);
+
+ if (!p->bdev || !blk_queue_nonrot(bdev_get_queue(p->bdev)))
+ atomic_dec(&nr_rotate_swap);
+
+ release_swap_info_memory(p);
+
+ /*
+ * Clear the SWP_USED flag after all resources are freed so that swapon
+ * can reuse this swap_info in alloc_swap_info() safely. It is ok to
+ * not hold p->lock after we cleared its SWP_WRITEOK.
+ */
+ spin_lock(&swap_lock);
+ p->flags = 0;
+ spin_unlock(&swap_lock);
+
+ err = 0;
+ atomic_inc(&proc_poll_event);
+ wake_up_interruptible(&proc_poll_wait);
+
+ found = 0;
+ goto rescan;
+out:
+ kfree(tmp);
+ return err;
+}
+
SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
{
struct swap_info_struct *p = NULL;
@@ -2496,8 +2579,12 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)

victim = file_open_name(pathname, O_RDWR|O_LARGEFILE, 0);
err = PTR_ERR(victim);
- if (IS_ERR(victim))
+ if (IS_ERR(victim)) {
+ /* check if the pathname is a device that has been unpluged */
+ err = swapoff_invalid_swapinfo();
+ err = err < 0 ? err : PTR_ERR(victim);
goto out;
+ }

mapping = victim->f_mapping;
spin_lock(&swap_lock);
@@ -3028,6 +3115,10 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
if (!swap_avail_heads)
return -ENOMEM;

+ error = swapoff_invalid_swapinfo();
+ if (error < 0)
+ return error;
+
p = alloc_swap_info();
if (IS_ERR(p))
return PTR_ERR(p);
--
2.27.0
\
 
 \ /
  Last update: 2022-06-15 09:04    [W:0.225 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site