lkml.org 
[lkml]   [2022]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/3] dt-bindings: dsp: mediatek: add mt8186 dsp document
From
On 09/06/2022 01:31, Tinghan Shen wrote:
> This patch adds mt8186 dsp document. The dsp is used for Sound Open
> Firmware driver node. It includes registers, clocks, memory regions,
> and mailbox for dsp.
>
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> ---
> .../bindings/dsp/mediatek,mt8186-dsp.yaml | 91 +++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
>
> diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
> new file mode 100644
> index 000000000000..33c78f89d296
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek mt8186 DSP core
> +
> +maintainers:
> + - Tinghan Shen <tinghan.shen@mediatek.com>
> +
> +description: |
> + MediaTek mt8186 SoC contains a DSP core used for
> + advanced pre- and post- audio processing.
> +
> +properties:
> + compatible:
> + const: mediatek,mt8186-dsp
> +
> + reg:
> + items:
> + - description: Address and size of the DSP config registers
> + - description: Address and size of the DSP SRAM
> + - description: Address and size of the DSP secure registers
> + - description: Address and size of the DSP bus registers
> +
> + reg-names:
> + items:
> + - const: cfg
> + - const: sram
> + - const: sec
> + - const: bus
> +
> + clocks:
> + items:
> + - description: mux for audio dsp clock
> + - description: mux for audio dsp local bus
> +
> + clock-names:
> + items:
> + - const: audiodsp
> + - const: adsp_bus
> +
> + power-domains:
> + maxItems: 1
> +
> + mboxes:
> + items:
> + - description: ipc reply between host and audio DSP.
> + - description: ipc request between host and audio DSP.

"IPC request between" does not specify who sends the request. Host or DSP?

See existing bindings for some better examples, e.g.:
Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml
which clearly states who receives from who.

> +
> + mbox-names:
> + items:
> + - const: rep
> + - const: req

tx/rx




Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-06-15 19:34    [W:0.090 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site