lkml.org 
[lkml]   [2022]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: 回复: [PATCH 2/2] u io:powerpc:mpc85xx : l2-cache-sram uio driver implementation
On Tue, Jun 14, 2022 at 06:09:35AM +0000, Wenhu Wang wrote:
> Hi Greg, thanks for the comments.
> The questions are replied specifically below.
> I have figured out and tested the patch v2, which is to be posted later.
> >发件人: Greg KH <gregkh@linuxfoundation.org>
> >发送时间: 2022年6月9日 21:17
> >收件人: Wang Wenhu <wenhu.wang@hotmail.com>
> >抄送: christophe.leroy@csgroup.eu <christophe.leroy@csgroup.eu>; mpe@ellerman.id.au <mpe@ellerman.id.au>; linuxppc-dev@lists.ozlabs.org <linuxppc-dev@lists.ozlabs.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
> >主题: Re: [PATCH 2/2] uio:powerpc:mpc85xx: l2-cache-sram uio driver implementation
> > 
> >On Thu, Jun 09, 2022 at 03:28:55AM -0700, Wang Wenhu wrote:
> >> The l2-cache could be optionally configured as SRAM partly or fully.
> >> Users can make use of it as a block of independent memory that offers
> >> special usage, such as for debuging or other cratical status info
> >> storage which keeps consistently even when the whole system crashed.
> >>
> >> The hardware related configuration process utilized the work of the
> >> earlier implementation, which has been removed now.
> >> See: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/commit/?id=dc21ed2aef4150fc2fcf58227a4ff24502015c03
> >>
> >> Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
> >> Signed-off-by: Wang Wenhu <wenhu.wang@hotmail.com>
> >> ---
> >>  drivers/uio/Kconfig                   |  10 +
> >>  drivers/uio/Makefile                  |   1 +
> >>  drivers/uio/uio_fsl_85xx_cache_sram.c | 286 ++++++++++++++++++++++++++
> >>  3 files changed, 297 insertions(+)
> >>  create mode 100644 drivers/uio/uio_fsl_85xx_cache_sram.c
> >>
> >> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> >> index 2e16c5338e5b..9199ced03880 100644
> >> --- a/drivers/uio/Kconfig
> >> +++ b/drivers/uio/Kconfig
> >> @@ -105,6 +105,16 @@ config UIO_NETX
> >>          To compile this driver as a module, choose M here; the module
> >>          will be called uio_netx.
> >> 
> >> +config UIO_FSL_85XX_CACHE_SRAM
> >> +     tristate "Freescale 85xx Cache-Sram driver"
> >> +     depends on FSL_SOC_BOOKE && PPC32
> >> +     help
> >> +       Generic driver for accessing the Cache-Sram form user level. This
> >> +       is extremely helpful for some user-space applications that require
> >> +       high performance memory accesses.
> >> +
> >> +       If you don't know what to do here, say N.
> >
> >Module name information?
> >
>
> More detailed and clearer info in v2
>
> >> +
> >>  config UIO_FSL_ELBC_GPCM
> >>        tristate "eLBC/GPCM driver"
> >>        depends on FSL_LBC
> >> diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
> >> index f2f416a14228..1ba07d92a1b1 100644
> >> --- a/drivers/uio/Makefile
> >> +++ b/drivers/uio/Makefile
> >> @@ -12,3 +12,4 @@ obj-$(CONFIG_UIO_MF624)         += uio_mf624.o
> >>  obj-$(CONFIG_UIO_FSL_ELBC_GPCM)      += uio_fsl_elbc_gpcm.o
> >>  obj-$(CONFIG_UIO_HV_GENERIC) += uio_hv_generic.o
> >>  obj-$(CONFIG_UIO_DFL)        += uio_dfl.o
> >> +obj-$(CONFIG_UIO_FSL_85XX_CACHE_SRAM)        += uio_fsl_85xx_cache_sram.o
> >> diff --git a/drivers/uio/uio_fsl_85xx_cache_sram.c b/drivers/uio/uio_fsl_85xx_cache_sram.c
> >> new file mode 100644
> >> index 000000000000..d363f9d2b179
> >> --- /dev/null
> >> +++ b/drivers/uio/uio_fsl_85xx_cache_sram.c
> >> @@ -0,0 +1,286 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * Copyright (C) 2022 Wang Wenhu <wenhu.wang@hotmail.com>
> >> + * All rights reserved.
> >> + */
> >> +
> >> +#include <linux/platform_device.h>
> >> +#include <linux/uio_driver.h>
> >> +#include <linux/stringify.h>
> >> +#include <linux/module.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/of_address.h>
> >> +#include <linux/io.h>
> >> +
> >> +#define DRIVER_NAME          "uio_mpc85xx_cache_sram"
> >> +#define UIO_INFO_VER "0.0.1"
> >> +#define UIO_NAME             "uio_cache_sram"
> >> +
> >> +#define L2CR_L2FI                            0x40000000      /* L2 flash invalidate */
> >> +#define L2CR_L2IO                            0x00200000      /* L2 instruction only */
> >> +#define L2CR_SRAM_ZERO                       0x00000000      /* L2SRAM zero size */
> >> +#define L2CR_SRAM_FULL                       0x00010000      /* L2SRAM full size */
> >> +#define L2CR_SRAM_HALF                       0x00020000      /* L2SRAM half size */
> >> +#define L2CR_SRAM_TWO_HALFS          0x00030000      /* L2SRAM two half sizes */
> >> +#define L2CR_SRAM_QUART                      0x00040000      /* L2SRAM one quarter size */
> >> +#define L2CR_SRAM_TWO_QUARTS 0x00050000      /* L2SRAM two quarter size */
> >> +#define L2CR_SRAM_EIGHTH             0x00060000      /* L2SRAM one eighth size */
> >> +#define L2CR_SRAM_TWO_EIGHTH 0x00070000      /* L2SRAM two eighth size */
> >> +
> >> +#define L2SRAM_OPTIMAL_SZ_SHIFT      0x00000003      /* Optimum size for L2SRAM */
> >> +
> >> +#define L2SRAM_BAR_MSK_LO18          0xFFFFC000      /* Lower 18 bits */
> >> +#define L2SRAM_BARE_MSK_HI4          0x0000000F      /* Upper 4 bits */
> >> +
> >> +enum cache_sram_lock_ways {
> >> +     LOCK_WAYS_ZERO,
> >> +     LOCK_WAYS_EIGHTH,
> >> +     LOCK_WAYS_TWO_EIGHTH,
> >Why not have values for these?
> >
>
> full values given in v2
>
> >> +     LOCK_WAYS_HALF = 4,
> >> +     LOCK_WAYS_FULL = 8,
> >> +};
> >> +
> >> +struct mpc85xx_l2ctlr {
> >> +     u32     ctl;            /* 0x000 - L2 control */
> >
> >What is the endian of these u32 values?  You map them directly to
> >memory, so they must be specified some way, right?  Please make it
> >obvious what they are.
> >
>
> Surely, the values should be u32 here, modified in v2
> The controller info could be found in
> "QorIQ™ P2020 Integrated Processor Reference Manual"
> "Chapter 6 L2 Look-Aside Cache/SRAM"
> See: http://m4udit.dinauz.org/P2020RM_rev0.pdf

That's not the answer to my question :)

These are big-endian, right? Please mark them as such and access them
properly with the correct functions.

> >> +     return remap_pfn_range(vma,
> >> +                                                vma->vm_start,
> >> +                                                mem->addr >> PAGE_SHIFT,
> >> +                                                vma->vm_end - vma->vm_start,
> >> +                                                vma->vm_page_prot);
> >
> >Odd indentation, did you use checkpatch.pl on your patch?
> >
>
> Actually, I checked with the scripts, and there was no warning here.
> I also checked in text editors and vim, if I translate tab with 4 spaces,
> the "vma/mem" areas in the 5 lines were aligned.

Tabs in Linux are always 8 spaces wide.

thanks,

greg k-h

\
 
 \ /
  Last update: 2022-06-14 08:36    [W:0.554 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site