lkml.org 
[lkml]   [2022]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] Bluetooth: RFCOMM: Use skb_trim to trim checksum
Hi Eric,

On 10.06.22 18:55, Eric Dumazet wrote:
> On Fri, Jun 10, 2022 at 8:35 AM Sönke Huster <soenke.huster@eknoes.de> wrote:
>>
>> Hi Eric,
>>
>> On 10.06.22 15:59, Eric Dumazet wrote:
>>> On Fri, Jun 10, 2022 at 4:08 AM Soenke Huster <soenke.huster@eknoes.de> wrote:
>>>>
>>>> As skb->tail might be zero, it can underflow. This leads to a page
>>>> fault: skb_tail_pointer simply adds skb->tail (which is now MAX_UINT)
>>>> to skb->head.
>>>>
>>>> BUG: unable to handle page fault for address: ffffed1021de29ff
>>>> #PF: supervisor read access in kernel mode
>>>> #PF: error_code(0x0000) - not-present page
>>>> RIP: 0010:rfcomm_run+0x831/0x4040 (net/bluetooth/rfcomm/core.c:1751)
>>>>
>>>> By using skb_trim instead of the direct manipulation, skb->tail
>>>> is reset. Thus, the correct pointer to the checksum is used.
>>>>
>>>> Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
>>>> ---
>>>> v2: Clarified how the bug triggers, minimize code change
>>>>
>>>> net/bluetooth/rfcomm/core.c | 2 +-
>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
>>>> index 7324764384b6..443b55edb3ab 100644
>>>> --- a/net/bluetooth/rfcomm/core.c
>>>> +++ b/net/bluetooth/rfcomm/core.c
>>>> @@ -1747,7 +1747,7 @@ static struct rfcomm_session *rfcomm_recv_frame(struct rfcomm_session *s,
>>>> type = __get_type(hdr->ctrl);
>>>>
>>>> /* Trim FCS */
>>>> - skb->len--; skb->tail--;
>>>> + skb_trim(skb, skb->len - 1);
>>>> fcs = *(u8 *)skb_tail_pointer(skb);
>>>>
>>>> if (__check_fcs(skb->data, type, fcs)) {
>>>> --
>>>> 2.36.1
>>>>
>>>
>>> Again, I do not see how skb->tail could possibly zero at this point.
>>>
>>> If it was, skb with illegal layout has been queued in the first place,
>>> we need to fix the producer, not the consumer.
>>>
>>
>> Sorry, I thought that might be a right place as there is not much code in the kernel
>> that manipulates ->tail directly.
>>
>>> A driver missed an skb_put() perhaps.
>>>
>>
>> I am using the (I guess quite unused) virtio_bt driver, and figured out that the following
>> fixes the bug:
>>
>> --- a/drivers/bluetooth/virtio_bt.c
>> +++ b/drivers/bluetooth/virtio_bt.c
>> @@ -219,7 +219,7 @@ static void virtbt_rx_work(struct work_struct *work)
>> if (!skb)
>> return;
>>
>> - skb->len = len;
>> + skb_put(skb, len);
>
> Removing skb->len=len seems about right.
> But skb_put() should be done earlier.
>
> We are approaching the skb producer :)
>
> Now you have to find/check who added this illegal skb in the virt queue.
>
> Maybe virtbt_add_inbuf() ?

I think here, the length of the skb can't really be known - an empty SKB is put into
the virtqueue, and then filled with data in the device, which is implemented in a Hypervisor.
Maybe my implementation of that device might then be wrong, on the other hand I am pretty
sure the driver should be the one that sets the length of the skb. But the driver only
knows it in virtbt_rx_work, as it learns the size of the added buffer there for the first time.

>
> Also there is kernel info leak I think.
>

I think your are right!

> diff --git a/drivers/bluetooth/virtio_bt.c b/drivers/bluetooth/virtio_bt.c
> index 67c21263f9e0f250f0719b8e7f1fe15b0eba5ee0..c9b832c447ee451f027430b284d7bb246f6ecb24
> 100644
> --- a/drivers/bluetooth/virtio_bt.c
> +++ b/drivers/bluetooth/virtio_bt.c
> @@ -37,6 +37,9 @@ static int virtbt_add_inbuf(struct virtio_bluetooth *vbt)
> if (!skb)
> return -ENOMEM;
>
> + skb_put(skb, 1000);
> + memset(skb->data, 0, 1000);
> +
> sg_init_one(sg, skb->data, 1000);
>
> err = virtqueue_add_inbuf(vq, sg, 1, skb, GFP_KERNEL);
>
>
>> virtbt_rx_handle(vbt, skb);
>>
>> if (virtbt_add_inbuf(vbt) < 0)
>>
>> I guess this is the root cause? I just used Bluetooth for a while in the VM
>> and no error occurred, everything worked fine.
>>
>>> Can you please dump the skb here ?
>>>
>>> diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
>>> index 7324764384b6773074032ad671777bf86bd3360e..358ccb4fe7214aea0bb4084188c7658316fe0ff7
>>> 100644
>>> --- a/net/bluetooth/rfcomm/core.c
>>> +++ b/net/bluetooth/rfcomm/core.c
>>> @@ -1746,6 +1746,11 @@ static struct rfcomm_session
>>> *rfcomm_recv_frame(struct rfcomm_session *s,
>>> dlci = __get_dlci(hdr->addr);
>>> type = __get_type(hdr->ctrl);
>>>
>>> + if (!skb->tail) {
>>> + DO_ONCE_LITE(skb_dump(KERN_ERR, skb, false));
>>> + kfree_skb(skb);
>>> + return s;
>>> + }
>>> /* Trim FCS */
>>> skb->len--; skb->tail--;
>>> fcs = *(u8 *)skb_tail_pointer(skb);
>>
>> If it might still help:
>>
>> skb len=4 headroom=9 headlen=4 tailroom=1728
>> mac=(-1,-1) net=(0,-1) trans=-1
>> shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
>> csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
>> hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0
>> skb linear: 00000000: 03 3f 01 1c
>>

\
 
 \ /
  Last update: 2022-06-14 15:45    [W:0.951 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site