lkml.org 
[lkml]   [2022]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 00/16] iio: adc: at91-sama5d2_adc: add support for temperature sensor
Date
On 11.06.2022 21:16, Jonathan Cameron wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On Thu, 9 Jun 2022 11:31:57 +0300
> Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
>
>> Hi,
>>
>> The following series add support for temperature sensor available on
>> SAMA7G5.
>>
>> Temperature sensor available on SAMA7G5 provides 2 outputs VTEMP and VBG.
>> VTEMP is proportional to the absolute temperature voltage and VBG is a
>> quasi-temperature independent voltage. Both are necessary in computing
>> the temperature (for better accuracy). Also, for better accuracy the
>> following settings were imposed when measusing the temperature:
>> oversampling rate of 256, sampling frequency of 10MHz, a startup time of
>> 512 ticks, MR.tracktim=0xf, EMR.trackx=0x3.
>>
>> For computing the temperature measured by ADC calibration data is
>> necessary. This is provided via OTP memory available on SAMA7G5.
>>
>> Patches 1/16-3/16 provides some fixes.
>> Patches 3/16-12/16 prepares for the addition of temperature sensor
>> support.
>> Patch 13/16 adds the temperature sensor support.
>>
>> Along with temperature sensor support I took the chance and added
>> runtime PM support in this series, too (handled in patch 15/16).
>>
>> The rest of patches in this series are minor cleanups.
>>
>> Thank you,
>> Claudiu Beznea
>
> Hi CLaudiu,
>
> Those patches I haven't replied to individually look good to me.

Hi, Jonathan,

Thank you for your review!

> > Thanks,
>
> Jonathan
>
>>
>> Claudiu Beznea (16):
>> iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
>> iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
>> iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are
>> enabled
>> iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw
>> versions
>> iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data
>> iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
>> iio: adc: at91-sama5d2_adc: simplify the code in
>> at91_adc_read_info_raw()
>> iio: adc: at91-sama5d2_adc: move oversampling storage in its function
>> iio: adc: at91-sama5d2_adc: update trackx on emr
>> iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for
>> at91_adc_setup_samp_freq()
>> iio: adc: at91-sama5d2_adc: add locking parameter to
>> at91_adc_read_info_raw()
>> dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature
>> channel
>> iio: adc: at91-sama5d2_adc: add support for temperature sensor
>> iio: adc: at91-sama5d2_adc: add empty line after functions
>> iio: adc: at91-sama5d2_adc: add runtime pm support
>> iio: adc: at91-sama5d2_adc: use pm_ptr()
>>
>> drivers/iio/adc/at91-sama5d2_adc.c | 633 +++++++++++++++---
>> .../dt-bindings/iio/adc/at91-sama5d2_adc.h | 3 +
>> 2 files changed, 548 insertions(+), 88 deletions(-)
>>
>

\
 
 \ /
  Last update: 2022-06-14 12:45    [W:1.228 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site