lkml.org 
[lkml]   [2022]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] mm/kmemleak: Skip unlikely objects in kmemleak_scan() without taking lock
Date
There are 3 RCU-based object iteration loops in kmemleak_scan(). Because
of the need to take RCU read lock, we can't insert cond_resched() into
the loop like other parts of the function. As there can be millions of
objects to be scanned, it takes a while to iterate all of them. The
kmemleak functionality is usually enabled in a debug kernel which is
much slower than a non-debug kernel. With sufficient number of kmemleak
objects, the time to iterate them all may exceed 22s causing soft lockup.

watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [kmemleak:625]

In this particular bug report, the soft lockup happen in the 2nd
iteration loop.

In the 2nd and 3rd loops, most of the objects are checked and then
skipped under the object lock. Only a selected fews are modified. Those
objects certainly need lock protection. However, the lock/unlock
operation is slow especially with interrupt disabling and enabling
included.

We can actually do some basic check like color_white() without taking
the lock and skip the object accordingly. Of course, this kind of check
is racy and may miss objects that are being modified concurrently. The
cost of missed objects, however, is just that they will be discovered in
the next scan instead. The advantage of doing so is that iteration can
be done much faster especially with LOCKDEP enabled in a debug kernel.

With a debug kernel running on a 2-socket 96-thread x86-64 system
(HZ=1000), the 2nd and 3rd iteration loops speedup with this patch on
the first kmemleak_scan() call after bootup is shown in the table below.

Before patch After patch
Loop # # of objects Elapsed time # of objects Elapsed time
------ ------------ ------------ ------------ ------------
2 2,599,850 2.392s 2,596,364 0.266s
3 2,600,176 2.171s 2,597,061 0.260s

This patch reduces loop iteration times by about 88%. This will greatly
reduce the chance of a soft lockup happening in the 2nd or 3rd iteration
loops.

Even though the first loop runs a little bit faster, it can still be
problematic if many kmemleak objects are there. As the object count
has to be modified in every object, we cannot avoid taking the object
lock. So other way to prevent soft lockup will be needed.

Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
mm/kmemleak.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index dad9219c972c..7dd64139a7c7 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1508,6 +1508,13 @@ static void kmemleak_scan(void)
*/
rcu_read_lock();
list_for_each_entry_rcu(object, &object_list, object_list) {
+ /*
+ * This is racy but we can save the overhead of lock/unlock
+ * calls. The missed objects, if any, should be caught in
+ * the next scan.
+ */
+ if (!color_white(object))
+ continue;
raw_spin_lock_irq(&object->lock);
if (color_white(object) && (object->flags & OBJECT_ALLOCATED)
&& update_checksum(object) && get_object(object)) {
@@ -1535,6 +1542,13 @@ static void kmemleak_scan(void)
*/
rcu_read_lock();
list_for_each_entry_rcu(object, &object_list, object_list) {
+ /*
+ * This is racy but we can save the overhead of lock/unlock
+ * calls. The missed objects, if any, should be caught in
+ * the next scan.
+ */
+ if (!color_white(object))
+ continue;
raw_spin_lock_irq(&object->lock);
if (unreferenced_object(object) &&
!(object->flags & OBJECT_REPORTED)) {
--
2.31.1
\
 
 \ /
  Last update: 2022-06-15 00:05    [W:0.321 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site