lkml.org 
[lkml]   [2022]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] scsi: storvsc: Correct reporting of Hyper-V I/O size limits
Date
Current code is based on the idea that the max number of SGL entries
also determines the max size of an I/O request. While this idea was
true in older versions of the storvsc driver when SGL entry length
was limited to 4 Kbytes, commit 3d9c3dcc58e9 ("scsi: storvsc: Enable
scatterlist entry lengths > 4Kbytes") removed that limitation. It's
now theoretically possible for the block layer to send requests that
exceed the maximum size supported by Hyper-V. This problem doesn't
currently happen in practice because the block layer defaults to a
512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes.
But some future configuration of Hyper-V could have a smaller max I/O
size, and the block layer could exceed that max.

Fix this by correctly setting max_sectors as well as sg_tablesize to
reflect the maximum I/O size that Hyper-V reports. While allowing
I/O sizes larger than the block layer default of 512 Kbytes doesn’t
provide any noticeable performance benefit in the tests we ran, it's
still appropriate to report the correct underlying Hyper-V capabilities
to the Linux block layer.

Also tweak the virt_boundary_mask to reflect that the required
alignment derives from Hyper-V communication using a 4 Kbyte page size,
and not on the guest page size, which might be bigger (eg. ARM64).

Fixes: 3d9c3dcc58e9 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
---
V3
- Remove single quotes around the 'Fixes' tag
- max_tx_bytes -> max_xfer_bytes
- Added empty line at start of comment

drivers/scsi/storvsc_drv.c | 27 ++++++++++++++++++++++-----
1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index ca35309..fe000da 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1844,7 +1844,7 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
.cmd_per_lun = 2048,
.this_id = -1,
/* Ensure there are no gaps in presented sgls */
- .virt_boundary_mask = PAGE_SIZE-1,
+ .virt_boundary_mask = HV_HYP_PAGE_SIZE - 1,
.no_write_same = 1,
.track_queue_depth = 1,
.change_queue_depth = storvsc_change_queue_depth,
@@ -1895,6 +1895,7 @@ static int storvsc_probe(struct hv_device *device,
int target = 0;
struct storvsc_device *stor_device;
int max_sub_channels = 0;
+ u32 max_xfer_bytes;

/*
* We support sub-channels for storage on SCSI and FC controllers.
@@ -1968,12 +1969,28 @@ static int storvsc_probe(struct hv_device *device,
}
/* max cmd length */
host->max_cmd_len = STORVSC_MAX_CMD_LEN;
-
/*
- * set the table size based on the info we got
- * from the host.
+ * Any reasonable Hyper-V configuration should provide
+ * max_transfer_bytes value aligning to HV_HYP_PAGE_SIZE,
+ * protecting it from any weird value.
+ */
+ max_xfer_bytes = round_down(stor_device->max_transfer_bytes, HV_HYP_PAGE_SIZE);
+ /* max_hw_sectors_kb */
+ host->max_sectors = max_xfer_bytes >> 9;
+ /*
+ * There are 2 requirements for Hyper-V storvsc sgl segments,
+ * based on which the below calculation for max segments is
+ * done:
+ *
+ * 1. Except for the first and last sgl segment, all sgl segments
+ * should be align to HV_HYP_PAGE_SIZE, that also means the
+ * maximum number of segments in a sgl can be calculated by
+ * dividing the total max transfer length by HV_HYP_PAGE_SIZE.
+ *
+ * 2. Except for the first and last, each entry in the SGL must
+ * have an offset that is a multiple of HV_HYP_PAGE_SIZE.
*/
- host->sg_tablesize = (stor_device->max_transfer_bytes >> PAGE_SHIFT);
+ host->sg_tablesize = (max_xfer_bytes >> HV_HYP_PAGE_SHIFT) + 1;
/*
* For non-IDE disks, the host supports multiple channels.
* Set the number of HW queues we are supporting.
--
1.8.3.1
\
 
 \ /
  Last update: 2022-06-14 09:07    [W:0.357 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site