lkml.org 
[lkml]   [2022]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 18/20] block, blksnap: Kconfig
From
Hi--

On 6/13/22 08:53, Sergei Shtepa wrote:
> The module configuration file allows you to set default values for
> module parameters.
>
> Signed-off-by: Sergei Shtepa <sergei.shtepa@veeam.com>
> ---
> drivers/block/blksnap/Kconfig | 101 ++++++++++++++++++++++++++++++++++
> 1 file changed, 101 insertions(+)
> create mode 100644 drivers/block/blksnap/Kconfig
>
> diff --git a/drivers/block/blksnap/Kconfig b/drivers/block/blksnap/Kconfig
> new file mode 100644
> index 000000000000..8588a89e30ad
> --- /dev/null
> +++ b/drivers/block/blksnap/Kconfig
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# block io layer filter module configuration

I prefer IO or I/O
but that's up to Jens.

> +#
> +#
> +
> +config BLK_SNAP
> + tristate "Block device snapshot and change tracker module"
> + depends on BLK_FILTER
> + help
> + Allow to create snapshots and track block changes for a block

for block

> + devices. Designed for creating backups for any block devices
> + (without device mapper). Snapshots are temporary and are released
> + then backup is completed. Change block tracking allows you to
> + create incremental or differential backups.
> +
> +config BLK_SNAP_TRACKING_BLOCK_MINIMUM_SHIFT
> + depends on BLK_SNAP
> + int "The power of 2 for minimum trackings block size"

tracking (I think.)

> + default 16
> + help
> + The minimum tracking block size by default is 64 KB (shift 16)

End above with a period ('.'): (shift 16).

> + It's looks good for block device 128 GB or lower.

It looks good
except saying something about performance would be better than "looks good".

> + In this case, the block device is divided into 2097152 blocks.
> +
> +config BLK_SNAP_TRACKING_BLOCK_MAXIMUM_COUNT
> + depends on BLK_SNAP
> + int "The limit of the maximum number of trackings blocks"

tracking (IMO)

> + default 2097152
> + help
> + As the size of the block device grows, the size of the tracking block
> + size should also grow. For this purpose, the limit of the maximum
> + number of block size is set.
> +
> +config BLK_SNAP_CHUNK_MINIMUM_SHIFT
> + depends on BLK_SNAP
> + int "The power of 2 for minimum snapshots chunk size"
> + default 18
> + help
> + The minimum chunk size by default is 256 KB (shift 18)

(shift 18).

> + It's looks good for block device 128 GB or lower.

It looks good
except that something more technical would be better here.

> + In this case, the block device is divided into 524288 chunks.
> +
> +config BLK_SNAP_CHUNK_MAXIMUM_COUNT
> + depends on BLK_SNAP
> + int "The limit of the maximum number of snapshots chunks"
> + default 2097152
> + help
> + As the size of the block device grows, the size of the chunk
> + should also grow. For this purpose, the limit of the maximum number
> + of chunks is set.

Is the "limit of the maximum number" the same as "the maximum number" of chunks?
Using "limit ... maximum" seems redundant to me.

> +
> +config BLK_SNAP_CHUNK_MAXIMUM_IN_CACHE
> + depends on BLK_SNAP
> + int "The limit of the maximum chunks in memory cache"

or just "Maximum number of chunks in memory cache"
?

> + default 64
> + help
> + Since reading and writing to snapshots is performed in large chunks,
> + a cache is implemented to optimize reading small portions of data
> + from the snapshot image. As the number of chunks in the cache
> + increases, memory consumption also increases.
> + The minimum recommended value is four.
> +
> +config BLK_SNAP_FREE_DIFF_BUFFER_POOL_SIZE
> + depends on BLK_SNAP
> + int "The maximum size of the free buffers pool"
> + default 128
> + help
> + A buffer can be allocated for each chunk. After use, this buffer is
> + not released immediately, but is sent to the pool of free buffers.
> + However, if there are too many free buffers in the pool, they are

Here, does "they"
mean the extra buffers (> BLK_SNAP_DIFF_BUFFER_POOL_SIZE) or all of the
pool of free buffers?


> + released immediately. The maximum size of the pool is regulated by
> + this define.

I would s/define/configuration/.

> +
> +config BLK_SNAP_DIFF_STORAGE_MINIMUM
> + depends on BLK_SNAP
> + int "The minimum allowable size of the difference storage in sectors"

What is "difference storage"?

> + default 2097152
> + help
> + When reached, an event is generated about the lack of free space.
> +
> +config BLK_SNAP_DEBUG_MEMORY_LEAK
> + depends on BLK_SNAP
> + bool "Enable memory leak detector"
> + default n
> + help
> + Enables debugging code to monitor memory consumption by the module.
> +
> + If unsure, say N.
> +
> +config BLK_SNAP_ALLOW_DIFF_STORAGE_IN_MEMORY
> + depends on BLK_SNAP
> + bool "Allow difference storage in memory"

Is "difference storage" described somewhere?

> + default n
> + help
> + Enables the ability to create a repository of changes in memory.
> + This feature can be useful for debugging. Or it can be used for
> + mobile phones or other devices if there are guaranteed not to be
> + a large number of writings during the snapshot hold.
> +
> + If unsure, say N.

thanks.
--
~Randy

\
 
 \ /
  Last update: 2022-06-13 23:40    [W:0.211 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site