Messages in this thread Patch in this message | | | From | Tim Harvey <> | Subject | [PATCH] arm64: dts: imx8mm-venice-gw7902: fix UART1 CTS | Date | Mon, 13 Jun 2022 12:08:18 -0700 |
| |
Configure the correct GPIO for UART1 CTS.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 407ab4592b4c..6692e55df752 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -651,7 +651,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; uart-has-rtscts; status = "okay"; }; -- 2.17.1
| |