lkml.org 
[lkml]   [2022]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 15/15] video: backlight: mt6370: Add Mediatek MT6370 support
On Mon, Jun 13, 2022 at 07:11:46PM +0800, ChiaEn Wu wrote:
> +static int mt6370_init_backlight_properties(struct mt6370_priv *priv,
> + struct backlight_properties *props)

Most of the changes in this version looks good... but it looks the new
code in this function has a number of problems. See below...


> +{
> + struct device *dev = priv->dev;
> + u8 prop_val;
> + u32 brightness;
> + unsigned int mask, val;
> + int ret;
> +
> + /* Vendor optional properties
> + * if property not exist, keep value in default.
> + */

That's not the right strategy for booleans. Not existing means false
(e.g. flags should actively be unset).


> + if (device_property_read_bool(dev, "mediatek,bled-pwm-enable")) {
> + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_PWM,
> + MT6370_BL_PWM_EN_MASK,
> + MT6370_BL_PWM_EN_MASK);
> + if (ret)
> + return ret;
> + }

As above comment... all of the boolean properties are now being read
incorrectly.


> +
> + if (device_property_read_bool(dev, "mediatek,bled-pwm-hys-enable")) {
> + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_PWM,
> + MT6370_BL_PWM_HYS_EN_MASK,
> + MT6370_BL_PWM_HYS_EN_MASK);
> + if (ret)
> + return ret;
> + }
> +
> + ret = device_property_read_u8(dev, "mediatek,bled-pwm-hys-input-bit",
> + &prop_val);
> + if (!ret) {
> + val = min_t(u8, prop_val, 3)
> + << (ffs(MT6370_BL_PWM_HYS_SEL_MASK) - 1);
> + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_PWM,
> + MT6370_BL_PWM_HYS_SEL_MASK, val);
> + if (ret)
> + return ret;
> + }
> +
> + ret = device_property_read_u8(dev, "mediatek,bled-ovp-microvolt",
> + &prop_val);
> + if (!ret) {
> + val = min_t(u8, prop_val, 3)
> + << (ffs(MT6370_BL_OVP_SEL_MASK) - 1);

This has been renamed but still seems to the using 0, 1, 2, 3 rather
than an actual value in microvolts.


> + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_BSTCTRL,
> + MT6370_BL_OVP_SEL_MASK, val);
> + if (ret)
> + return ret;
> + }
> +
> + if (device_property_read_bool(dev, "mediatek,bled-ovp-shutdown")) {
> + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_BSTCTRL,
> + MT6370_BL_OVP_EN_MASK,
> + MT6370_BL_OVP_EN_MASK);
> + if (ret)
> + return ret;
> + }
> +
> + ret = device_property_read_u8(dev, "mediatek,bled-ocp-microamp",
> + &prop_val);
> + if (!ret) {
> + val = min_t(u8, prop_val, 3)
> + << (ffs(MT6370_BL_OC_SEL_MASK) - 1);

Likewise, should this be accepting a value in microamps?


> + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_BSTCTRL,
> + MT6370_BL_OC_SEL_MASK, val);
> + if (ret)
> + return ret;
> + }
> +
> + if (device_property_read_bool(dev, "mediatek,bled-ocp-shutdown")) {
> + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_BSTCTRL,
> + MT6370_BL_OC_EN_MASK,
> + MT6370_BL_OC_EN_MASK);
> + if (ret)
> + return ret;
> + }
> +
> + /* Common properties */
> + ret = device_property_read_u32(dev, "max-brightness", &brightness);
> + if (ret)
> + brightness = MT6370_BL_MAX_BRIGHTNESS;
> +
> + props->max_brightness = min_t(u32, brightness,
> + MT6370_BL_MAX_BRIGHTNESS);
> +
> + ret = device_property_read_u32(dev, "default-brightness", &brightness);
> + if (ret)
> + brightness = props->max_brightness;
> +
> + props->brightness = min_t(u32, brightness, props->max_brightness);
> +
> +
> + ret = device_property_read_u8(dev, "mediatek,bled-channel-use",
> + &prop_val);
> + if (ret) {
> + dev_err(dev, "mediatek,bled-channel-use DT property missing\n");
> + return ret;
> + }
> +
> + if (!prop_val || prop_val > MT6370_BL_MAX_CH) {
> + dev_err(dev, "No channel specified (ch_val:%d)\n", prop_val);

Error string has not been updated to match condition that triggers it.


> + return -EINVAL;
> + }


Daniel.

\
 
 \ /
  Last update: 2022-06-13 21:12    [W:0.327 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site