lkml.org 
[lkml]   [2022]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3] dt-bindings: ata: ahci-ceva: convert to yaml
Date
Convert the ahci-ceva doc to yaml.

Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
---
.../devicetree/bindings/ata/ahci-ceva.txt | 63 ------
.../devicetree/bindings/ata/ahci-ceva.yaml | 191 ++++++++++++++++++
2 files changed, 191 insertions(+), 63 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/ata/ahci-ceva.txt
create mode 100644 Documentation/devicetree/bindings/ata/ahci-ceva.yaml

diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
deleted file mode 100644
index bfb6da0281ec..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Binding for CEVA AHCI SATA Controller
-
-Required properties:
- - reg: Physical base address and size of the controller's register area.
- - compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
- - clocks: Input clock specifier. Refer to common clock bindings.
- - interrupts: Interrupt specifier. Refer to interrupt binding.
- - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
- - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
- The fields for the above parameter must be as shown below:
- ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
- CINMP : COMINIT Negate Minimum Period.
- CIBGN : COMINIT Burst Gap Nominal.
- CIBGMX: COMINIT Burst Gap Maximum.
- CIBGMN: COMINIT Burst Gap Minimum.
- - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
- - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
- The fields for the above parameter must be as shown below:
- ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
- CWBGMN: COMWAKE Burst Gap Minimum.
- CWBGMX: COMWAKE Burst Gap Maximum.
- CWBGN: COMWAKE Burst Gap Nominal.
- CWNMP: COMWAKE Negate Minimum Period.
- - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
- - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
- The fields for the above parameter must be as shown below:
- ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
- BMX: COM Burst Maximum.
- BNM: COM Burst Nominal.
- SFD: Signal Failure Detection value.
- PTST: Partial to Slumber timer value.
- - ceva,p0-retry-params: Retry interval timing value for port 0.
- - ceva,p1-retry-params: Retry interval timing value for port 1.
- The fields for the above parameter must be as shown below:
- ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
- RIT: Retry Interval Timer.
- RCT: Rate Change Timer.
-
-Optional properties:
- - ceva,broken-gen2: limit to gen1 speed instead of gen2.
- - phys: phandle for the PHY device
- - resets: phandle to the reset controller for the SATA IP
-
-Examples:
- ahci@fd0c0000 {
- compatible = "ceva,ahci-1v84";
- reg = <0xfd0c0000 0x200>;
- interrupt-parent = <&gic>;
- interrupts = <0 133 4>;
- clocks = <&clkc SATA_CLK_ID>;
- ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
- ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
- ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
- ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-
- ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
- ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
- ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
- ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
- ceva,broken-gen2;
- phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
- resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
- };
diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.yaml b/Documentation/devicetree/bindings/ata/ahci-ceva.yaml
new file mode 100644
index 000000000000..f13b3286a079
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-ceva.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-ceva.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ceva AHCI SATA Controller
+
+description: |
+ The Ceva SATA controller mostly conforms to the AHCI interface with some
+ special extensions to add functionality, is a high-performance dual-port
+ SATA host controller with an AHCI compliant command layer which supports
+ advanced features such as native command queuing and frame information
+ structure (FIS) based switching for systems employing port multipliers.
+
+maintainers:
+ - Piyush Mehta <piyush.mehta@xilinx.com>
+
+properties:
+ compatible:
+ const: ceva,ahci-1v84
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dma-coherent: true
+
+ power-domains:
+ description: |
+ Specifies a phandle to PM domain provider node.
+ maxItems: 1
+
+ ceva,p0-cominit-params:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 4
+ maxItems: 4
+ description: |
+ OOB timing value for COMINIT parameter for port 0.
+ The fields for the above parameter must be as shown below:-
+ ceva,p0-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+ CINMP - COMINIT Negate Minimum Period.
+ CIBGN - COMINIT Burst Gap Nominal.
+ CIBGMX - COMINIT Burst Gap Maximum.
+ CIBGMN - COMINIT Burst Gap Minimum.
+
+ ceva,p0-comwake-params:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 4
+ maxItems: 4
+ description: |
+ OOB timing value for COMWAKE parameter for port 0.
+ The fields for the above parameter must be as shown below:-
+ ceva,p0-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+ CWBGMN - COMWAKE Burst Gap Minimum.
+ CWBGMX - COMWAKE Burst Gap Maximum.
+ CWBGN - COMWAKE Burst Gap Nominal.
+ CWNMP - COMWAKE Negate Minimum Period.
+
+ ceva,p0-burst-params:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 4
+ maxItems: 4
+ description: |
+ Burst timing value for COM parameter for port 0.
+ The fields for the above parameter must be as shown below:-
+ ceva,p0-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+ BMX - COM Burst Maximum.
+ BNM - COM Burst Nominal.
+ SFD - Signal Failure Detection value.
+ PTST - Partial to Slumber timer value.
+
+ ceva,p0-retry-params:
+ $ref: /schemas/types.yaml#/definitions/uint16-array
+ minItems: 2
+ maxItems: 2
+ description: |
+ Retry interval timing value for port 0.
+ The fields for the above parameter must be as shown below:-
+ ceva,p0-retry-params = /bits/ 16 <RIT RCT>;
+ RIT - Retry Interval Timer.
+ RCT - Rate Change Timer.
+
+ ceva,p1-cominit-params:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 4
+ maxItems: 4
+ description: |
+ OOB timing value for COMINIT parameter for port 1.
+ The fields for the above parameter must be as shown below:-
+ ceva,p1-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+ CINMP - COMINIT Negate Minimum Period.
+ CIBGN - COMINIT Burst Gap Nominal.
+ CIBGMX - COMINIT Burst Gap Maximum.
+ CIBGMN - COMINIT Burst Gap Minimum.
+
+ ceva,p1-comwake-params:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 4
+ maxItems: 4
+ description: |
+ OOB timing value for COMWAKE parameter for port 1.
+ The fields for the above parameter must be as shown below:-
+ ceva,p1-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+ CWBGMN - COMWAKE Burst Gap Minimum.
+ CWBGMX - COMWAKE Burst Gap Maximum.
+ CWBGN - COMWAKE Burst Gap Nominal.
+ CWNMP - COMWAKE Negate Minimum Period.
+
+ ceva,p1-burst-params:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 4
+ maxItems: 4
+ description: |
+ Burst timing value for COM parameter for port 1.
+ The fields for the above parameter must be as shown below:-
+ ceva,p1-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+ BMX - COM Burst Maximum.
+ BNM - COM Burst Nominal.
+ SFD - Signal Failure Detection value.
+ PTST - Partial to Slumber timer value.
+
+ ceva,p1-retry-params:
+ $ref: /schemas/types.yaml#/definitions/uint16-array
+ minItems: 2
+ maxItems: 2
+ description: |
+ Retry interval timing value for port 1.
+ The fields for the above parameter must be as shown below:-
+ ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+ RIT - Retry Interval Timer.
+ RCT - Rate Change Timer.
+
+ ceva,broken-gen2:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ limit to gen1 speed instead of gen2.
+
+ phys:
+ description: |
+ Phandle for the PHY device.
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#stream-id-cells':
+ const: 4
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
+ #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+ #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+ #include <dt-bindings/phy/phy.h>
+
+ sata: ahci@fd0c0000 {
+ compatible = "ceva,ahci-1v84";
+ reg = <0xfd0c0000 0x200>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&zynqmp_clk SATA_REF>;
+ ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+ ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
+ ceva,broken-gen2;
+ phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+ };
+
+...
--
2.17.1
\
 
 \ /
  Last update: 2022-06-13 20:27    [W:0.044 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site