lkml.org 
[lkml]   [2022]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V8 2/3] rtc: zynqmp: Updated calibration value
Date
As per RTC spec default calibration value is 0x7FFF.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
---
Changes in V8
-None, just swapped 2/3 and 3/3 patches from V7.
Changes in V7:
-New patch
-TRM not updated yet, Internal design document contains 0x7FFF as
default value. TRM Will update in next release.
---
drivers/rtc/rtc-zynqmp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c
index f440bb52be92..5da33d760419 100644
--- a/drivers/rtc/rtc-zynqmp.c
+++ b/drivers/rtc/rtc-zynqmp.c
@@ -36,7 +36,7 @@
#define RTC_OSC_EN BIT(24)
#define RTC_BATT_EN BIT(31)

-#define RTC_CALIB_DEF 0x198233
+#define RTC_CALIB_DEF 0x7FFF
#define RTC_CALIB_MASK 0x1FFFFF
#define RTC_ALRM_MASK BIT(1)
#define RTC_MSEC 1000
--
2.25.1
\
 
 \ /
  Last update: 2022-06-13 19:36    [W:0.132 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site