lkml.org 
[lkml]   [2022]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] ARM: dts: stm32: remove the IPCC "wakeup" IRQ on stm32mp151
From
Hi Fabien

On 5/3/22 16:56, Fabien Dessenne wrote:
> The stm32 ipcc mailbox driver supports only two interrupts (rx and tx), so
> remove the unsupported "wakeup" one.
> Note that the EXTI interrupt 61 has two roles : it is hierarchically linked
> to the GIC IPCC "rx" interrupt, and it acts as a wakeup source.
>
> Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
> ---
> arch/arm/boot/dts/stm32mp151.dtsi | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index 7fdc324b3cf9..edc0a1641c7b 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1117,10 +1117,9 @@ ipcc: mailbox@4c001000 {
> reg = <0x4c001000 0x400>;
> st,proc-id = <0>;
> interrupts-extended =
> - <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> - <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> - <&exti 61 1>;
> - interrupt-names = "rx", "tx", "wakeup";
> + <&exti 61 1>,
> + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "rx", "tx";
> clocks = <&rcc IPCC>;
> wakeup-source;
> status = "disabled";

Applied on stm32-next.

Thanks.
Alex

\
 
 \ /
  Last update: 2022-06-13 09:40    [W:0.062 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site