lkml.org 
[lkml]   [2022]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 258/411] rtl818x: Prevent using not initialized queues
Date
From: Alexander Wetzel <alexander@wetzel-home.de>

commit 746285cf81dc19502ab238249d75f5990bd2d231 upstream.

Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum:

https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html

He also confirmed that this patch fixes the issue. In summary this happened:

After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.

Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.

rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries

"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized.

Cc: stable@vger.kernel.org
Reported-by: pa@panix.com
Tested-by: pa@panix.com
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
@@ -460,8 +460,10 @@ static void rtl8180_tx(struct ieee80211_
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_tx_ring *ring;
struct rtl8180_tx_desc *entry;
+ unsigned int prio = 0;
unsigned long flags;
- unsigned int idx, prio, hw_prio;
+ unsigned int idx, hw_prio;
+
dma_addr_t mapping;
u32 tx_flags;
u8 rc_flags;
@@ -470,7 +472,9 @@ static void rtl8180_tx(struct ieee80211_
/* do arithmetic and then convert to le16 */
u16 frame_duration = 0;

- prio = skb_get_queue_mapping(skb);
+ /* rtl8180/rtl8185 only has one useable tx queue */
+ if (dev->queues > IEEE80211_AC_BK)
+ prio = skb_get_queue_mapping(skb);
ring = &priv->tx_ring[prio];

mapping = pci_map_single(priv->pdev, skb->data,

\
 
 \ /
  Last update: 2022-06-13 13:35    [W:1.016 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site