lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] Configurable VLAN mode for NCSI driver
Date
Currently kernel kernel NCSI driver only supports the "VLAN + non-VLAN"
mode (Mode #2), but this mode is an optional mode [1] defined in NCSI
specification and some NCSI devices like Intel E810 Network Adapter [2]
does not support that mode. This patchset adds a new "ncsi,vlan-mode"
device tree property for configuring the VLAN mode of NCSI device.

[1] Table 58 - VLAN Enable Modes
https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.0.0.pdf
[2] 12.6.5.4.3 VLAN
https://cdrdv2.intel.com/v1/dl/getContent/613875

Jiaqing Zhao (6):
net/ncsi: Fix value of NCSI_CAP_VLAN_ANY
net/ncsi: Rename NCSI_CAP_VLAN_NO to NCSI_CAP_VLAN_FILTERED
net/ncsi: Enable VLAN filtering when callback is registered
ftgmac100: Remove enable NCSI VLAN filtering
dt-bindings: net: Add NCSI bindings
net/ncsi: Support VLAN mode configuration

.../devicetree/bindings/net/ncsi.yaml | 34 ++++++++++++++
MAINTAINERS | 2 +
drivers/net/ethernet/faraday/ftgmac100.c | 3 --
include/dt-bindings/net/ncsi.h | 15 ++++++
net/ncsi/internal.h | 5 +-
net/ncsi/ncsi-manage.c | 46 ++++++++++++++++---
6 files changed, 93 insertions(+), 12 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ncsi.yaml
create mode 100644 include/dt-bindings/net/ncsi.h

--
2.34.1

\
 
 \ /
  Last update: 2022-06-10 18:49    [W:0.042 / U:1.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site