lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v6 00/17] Move HEVC stateless controls out of staging
Date
>This series aims to make HEVC uapi stable and usable for hardware
>decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
>and 2 out of the tree drivers (rkvdec and RPI).
>
>version 6:
>- Add short_term_ref_pic_set_size and long_term_ref_pic_set_size
> in v4l2_ctrl_hevc_decode_params structure.
>- Change slice_pic_order_cnt type to s32 to match with PoC type.
>- Set V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag automatically when using
> V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control.
>- Add a define for max slices count
>- Stop using Hantro dedicated control.
>
>This version has been tested with these branches:
>- GStreamer: https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/tree/HEVC_aligned_with_kernel_5.15
>- Linux: https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/tree/HEVC_UAPI_V6
>
>With patches to decode 10-bits bitstream and produce P010 frames the Fluster score
>which was 77/147 before, is now 138/147.
>The 10-bits series will comes after this because of it dependency to
>uAPI change. If you are curious you can find the WIP branch here:
>https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/WIP_HEVC_UAPI_V6
>
>The 9 failing tests are:
>- CONFWIN_A_Sony_1 which contains conformance_window_flag that isn't supported
> by the hardware (but visually ok aside a pixel shift).
>- PICSIZE_{A,B,C,D}_Bossen_1 where resolutions are to big for Hantro hardware.
>- TSKIP_A_MS_3 is ok when testing alone but fail (corrupted lines on the
> first frame) when running it after a couple of other tests.
>- VPSSPSPPS_A_MainConcept_1 where there is an issue on gst parser side
> because of VPS/SPS/PPS ordering
>- WPP_D_ericsson_MAIN_2 and WPP_D_ericsson_MAIN10_2 are visually ok but some
> difference exist on 5 decoded frames. Some pixels values are no the same
> the very end of few lines.
>
>version 6:
>- Stop using Hantro dedicated control and compute the number
> of bytes to skip inside the driver.
>- Rebased on media_tree/master
>
>version 5:
>- Change __u16 pic_order_cnt[2] into __s32 pic_order_cnt_val in
> hevc_dpb_entry structure
>- Add defines for SEI pic_struct values (patch 4)
>- Fix numbers of bits computation in cedrus_h265_skip_bits() parameters
>- Fix num_short_term_ref_pic_sets and num_long_term_ref_pics_sps
> documentation (patch 8)
>- Rebased on v5-18-rc1
>
>GStreamer H265 decoder plugin aligned with HEVC uAPI v5:
>https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/tree/HEVC_aligned_with_kernel_5.15
>
>Version 4:
>- Add num_entry_point_offsets field in struct v4l2_ctrl_hevc_slice_params
>- Fix V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS name
>- Initialize control V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
>- Fix space/tab issue in kernel-doc
>- Add patch to change data_bit_offset definition
>- Fix hantro-media SPDX license
>- put controls under stateless section in v4l2-ctrls-defs.c
>
>At the end fluster tests results on IMX8MQ is 77/147 for HEVC codec.
>
>Benjamin Gaignard (14):
> media: uapi: HEVC: Add missing fields in HEVC controls
> media: uapi: HEVC: Rename HEVC stateless controls with STATELESS
> prefix
> media: uapi: HEVC: Change pic_order_cnt definition in
> v4l2_hevc_dpb_entry
> media: uapi: HEVC: Add SEI pic struct flags
> media: uapi: HEVC: Add documentation to uAPI structure
> media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a
> dynamic array
> media: uapi: Move parsed HEVC pixel format out of staging
> media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS control
> media: uapi: Move the HEVC stateless control type out of staging
> media: controls: Log HEVC stateless control in .std_log
> media: hantro: Stop using Hantro dedicated control
> media: uapi: HEVC: fix padding in v4l2 control structures
> media: uapi: Change data_bit_offset definition
> media: uapi: move HEVC stateless controls out of staging
>
>Hans Verkuil (3):
> videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
> v4l2-ctrls: add support for dynamically allocated arrays.
> vivid: add dynamic array test control
>
> .../media/v4l/ext-ctrls-codec-stateless.rst | 897 ++++++++++++++++++
> .../media/v4l/ext-ctrls-codec.rst | 780 ---------------
> .../media/v4l/pixfmt-compressed.rst | 7 +-
> .../media/v4l/vidioc-g-ext-ctrls.rst | 20 +
> .../media/v4l/vidioc-queryctrl.rst | 8 +
> .../media/videodev2.h.rst.exceptions | 5 +
> .../media/test-drivers/vivid/vivid-ctrls.c | 15 +
> drivers/media/v4l2-core/v4l2-ctrls-api.c | 103 +-
> drivers/media/v4l2-core/v4l2-ctrls-core.c | 206 +++-
> drivers/media/v4l2-core/v4l2-ctrls-defs.c | 38 +-
> drivers/media/v4l2-core/v4l2-ctrls-priv.h | 3 +-
> drivers/media/v4l2-core/v4l2-ctrls-request.c | 13 +-
> drivers/staging/media/hantro/hantro_drv.c | 62 +-
> .../staging/media/hantro/hantro_g2_hevc_dec.c | 69 +-
> drivers/staging/media/hantro/hantro_hevc.c | 10 +-
> drivers/staging/media/hantro/hantro_hw.h | 4 +-
> drivers/staging/media/sunxi/cedrus/cedrus.c | 24 +-
> .../staging/media/sunxi/cedrus/cedrus_dec.c | 10 +-
> .../staging/media/sunxi/cedrus/cedrus_h265.c | 6 +-
> include/media/hevc-ctrls.h | 250 -----
> include/media/v4l2-ctrls.h | 48 +-
> include/uapi/linux/v4l2-controls.h | 458 +++++++++
> include/uapi/linux/videodev2.h | 13 +
> 23 files changed, 1830 insertions(+), 1219 deletions(-)
> delete mode 100644 include/media/hevc-ctrls.h

For general info, I've ported this patchset to my Raspberry Pi
implementation without issue - so at least in terms of "is this API
adequate for Pi?" the answer is yes.

Many thanks

JC

\
 
 \ /
  Last update: 2022-06-10 16:02    [W:0.156 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site