lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 04/10] tpm, tmp_tis: Claim locality before writing interrupt registers
Date
From: Lino Sanfilippo <l.sanfilippo@kunbus.com>

In tpm_tis_probe_single_irq interrupt registers TPM_INT_VECTOR,
TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts.
Currently these modifications are done without holding a locality thus they
have no effect. Fix this by claiming the (default) locality before the
registers are written.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
---
drivers/char/tpm/tpm_tis_core.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index dee701609b80..718525fcadc0 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -756,30 +756,45 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
}
priv->irq = irq;

+ rc = request_locality(chip, 0);
+ if (rc < 0)
+ return rc;
+
rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality),
&original_int_vec);
- if (rc < 0)
+ if (rc < 0) {
+ release_locality(chip, priv->locality);
return rc;
+ }

rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), irq);
- if (rc < 0)
+ if (rc < 0) {
+ release_locality(chip, priv->locality);
return rc;
+ }

rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &int_status);
- if (rc < 0)
+ if (rc < 0) {
+ release_locality(chip, priv->locality);
return rc;
+ }

/* Clear all existing */
rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), int_status);
- if (rc < 0)
+ if (rc < 0) {
+ release_locality(chip, priv->locality);
return rc;
+ }

/* Turn on */
rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality),
intmask | TPM_GLOBAL_INT_ENABLE);
- if (rc < 0)
+ if (rc < 0) {
+ release_locality(chip, priv->locality);
return rc;
+ }

+ release_locality(chip, priv->locality);
clear_bit(TPM_TIS_IRQ_TESTED, &priv->irqtest_flags);

/* Generate an interrupt by having the core call through to
--
2.36.1
\
 
 \ /
  Last update: 2022-06-10 13:10    [W:0.436 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site