lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND net-next v7 06/16] dt-bindings: net: dsa: add bindings for Renesas RZ/N1 Advanced 5 port switch
Date
Add bindings for Renesas RZ/N1 Advanced 5 port switch. This switch is
present on Renesas RZ/N1 SoC and was probably provided by MoreThanIP.
This company does not exists anymore and has been bought by Synopsys.
Since this IP can't be find anymore in the Synospsy portfolio, lets use
Renesas as the vendor compatible for this IP.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
.../bindings/net/dsa/renesas,rzn1-a5psw.yaml | 134 ++++++++++++++++++
1 file changed, 134 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml

diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
new file mode 100644
index 000000000000..103b1ef5af1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Advanced 5 ports ethernet switch
+
+maintainers:
+ - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+ The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and
+ handles 4 ports + 1 CPU management port.
+
+allOf:
+ - $ref: dsa.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a06g032-a5psw
+ - const: renesas,rzn1-a5psw
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
+ unevaluatedProperties: false
+
+ clocks:
+ items:
+ - description: AHB clock used for the switch register interface
+ - description: Switch system clock
+
+ clock-names:
+ items:
+ - const: hclk
+ - const: clk
+
+ ethernet-ports:
+ type: object
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^(ethernet-)?port@[0-4]$":
+ type: object
+ description: Ethernet switch ports
+
+ properties:
+ pcs-handle:
+ description:
+ phandle pointing to a PCS sub-node compatible with
+ renesas,rzn1-miic.yaml#
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+ switch@44050000 {
+ compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+ reg = <0x44050000 0x10000>;
+ clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>;
+ clock-names = "hclk", "clk";
+ power-domains = <&sysctrl>;
+
+ dsa,member = <0 0>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ phy-handle = <&switch0phy3>;
+ pcs-handle = <&mii_conv4>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ pcs-handle = <&mii_conv3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ ethernet = <&gmac2>;
+ label = "cpu";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>;
+ reset-delay-us = <15>;
+ clock-frequency = <2500000>;
+
+ switch0phy1: ethernet-phy@1{
+ reg = <1>;
+ };
+
+ switch0phy3: ethernet-phy@3{
+ reg = <3>;
+ };
+ };
+ };
--
2.36.1
\
 
 \ /
  Last update: 2022-06-10 12:45    [W:0.135 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site