lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 10/18] PCI: dwc: Convert Link-up status method to using dw_pcie_readl_dbi()
Date
While the rest of the generic DWC PCIe code is using the dedicated IO-mem
accessors, the dw_pcie_link_up() method for some unobvious reason directly
calls readl() to get PortLogic.DEBUG1 register content. Since the way the
dbi-bus is accessed can be platform-specific let's replace the direct dbi
memory space read procedure with the readl-wrapper invocation. Thus we'll
have a slightly more generic dw_pcie_link_up() method.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/pci/controller/dwc/pcie-designware.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index e5c30695f664..f9613835212b 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -548,7 +548,7 @@ int dw_pcie_link_up(struct dw_pcie *pci)
if (pci->ops && pci->ops->link_up)
return pci->ops->link_up(pci);

- val = readl(pci->dbi_base + PCIE_PORT_DEBUG1);
+ val = dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1);
return ((val & PCIE_PORT_DEBUG1_LINK_UP) &&
(!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
}
--
2.35.1
\
 
 \ /
  Last update: 2022-06-10 10:30    [W:0.449 / U:1.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site