lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/8] OPP: Allow multiple clocks for a device
Date
This patch adds support to allow multiple clocks for a device.

The design is pretty much similar to how this is done for regulators,
and platforms can supply their own version of the config_clks() callback
if they have multiple clocks for their device. The core manages the
calls via opp_table->config_clks() eventually.

We have kept both "clk" and "clks" fields in the OPP table structure and
the reason is provided as a comment in _opp_set_clknames(). The same
isn't done for "rates" though and we use rates[0] at most of the places
now.

Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/opp/core.c | 165 ++++++++++++++++++++++++++++-------------
drivers/opp/debugfs.c | 27 ++++++-
drivers/opp/of.c | 67 +++++++++++++----
drivers/opp/opp.h | 16 ++--
include/linux/pm_opp.h | 7 +-
5 files changed, 208 insertions(+), 74 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 6368ae2d7360..1e143bd8e589 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -177,7 +177,7 @@ unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp)
return 0;
}

- return opp->rate;
+ return opp->rates[0];
}
EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);

@@ -426,7 +426,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count);
/* Helpers to read keys */
static unsigned long _read_freq(struct dev_pm_opp *opp, int index)
{
- return opp->rate;
+ return opp->rates[0];
}

static unsigned long _read_level(struct dev_pm_opp *opp, int index)
@@ -766,8 +766,9 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg,
return ret;
}

-static inline int _generic_set_opp_clk_only(struct device *dev,
- struct opp_table *opp_table, struct dev_pm_opp *opp, void *data)
+static int
+_opp_config_clk_single(struct device *dev, struct opp_table *opp_table,
+ struct dev_pm_opp *opp, void *data, bool scaling_down)
{
unsigned long *target = data;
unsigned long freq;
@@ -781,7 +782,7 @@ static inline int _generic_set_opp_clk_only(struct device *dev,
if (target) {
freq = *target;
} else if (opp) {
- freq = opp->rate;
+ freq = opp->rates[0];
} else {
WARN_ON(1);
return -EINVAL;
@@ -1007,11 +1008,11 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
}

dev_dbg(dev, "%s: switching OPP: Freq %lu -> %lu Hz, Level %u -> %u, Bw %u -> %u\n",
- __func__, old_opp->rate, opp->rate, old_opp->level, opp->level,
- old_opp->bandwidth ? old_opp->bandwidth[0].peak : 0,
+ __func__, old_opp->rates[0], opp->rates[0], old_opp->level,
+ opp->level, old_opp->bandwidth ? old_opp->bandwidth[0].peak : 0,
opp->bandwidth ? opp->bandwidth[0].peak : 0);

- scaling_down = _opp_compare_key(old_opp, opp);
+ scaling_down = _opp_compare_key(opp_table, old_opp, opp);
if (scaling_down == -1)
scaling_down = 0;

@@ -1041,7 +1042,7 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
}
}

- ret = _generic_set_opp_clk_only(dev, opp_table, opp, clk_data);
+ ret = opp_table->config_clks(dev, opp_table, opp, clk_data, scaling_down);
if (ret)
return ret;

@@ -1115,8 +1116,8 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
* equivalent to a clk_set_rate()
*/
if (!_get_opp_count(opp_table)) {
- ret = _generic_set_opp_clk_only(dev, opp_table, NULL,
- &target_freq);
+ ret = opp_table->config_clks(dev, opp_table, NULL,
+ &target_freq, false);
goto put_opp_table;
}

@@ -1237,6 +1238,8 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
INIT_LIST_HEAD(&opp_table->dev_list);
INIT_LIST_HEAD(&opp_table->lazy);

+ opp_table->clk = ERR_PTR(-ENODEV);
+
/* Mark regulator count uninitialized */
opp_table->regulator_count = -1;

@@ -1283,18 +1286,22 @@ static struct opp_table *_update_opp_table_clk(struct device *dev,
int ret;

/*
- * Return early if we don't need to get clk or we have already tried it
+ * Return early if we don't need to get clk or we have already done it
* earlier.
*/
- if (!getclk || IS_ERR(opp_table) || opp_table->clk)
+ if (!getclk || IS_ERR(opp_table) || !IS_ERR(opp_table->clk) ||
+ opp_table->clks)
return opp_table;

/* Find clk for the device */
opp_table->clk = clk_get(dev, NULL);

ret = PTR_ERR_OR_ZERO(opp_table->clk);
- if (!ret)
+ if (!ret) {
+ opp_table->config_clks = _opp_config_clk_single;
+ opp_table->clk_count = 1;
return opp_table;
+ }

if (ret == -ENOENT) {
dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, ret);
@@ -1399,7 +1406,7 @@ static void _opp_table_kref_release(struct kref *kref)

_of_clear_opp_table(opp_table);

- /* Release clk */
+ /* Release automatically acquired single clk */
if (!IS_ERR(opp_table->clk))
clk_put(opp_table->clk);

@@ -1487,7 +1494,7 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq)
mutex_lock(&opp_table->lock);

list_for_each_entry(iter, &opp_table->opp_list, node) {
- if (iter->rate == freq) {
+ if (iter->rates[0] == freq) {
opp = iter;
break;
}
@@ -1594,24 +1601,28 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_remove_all_dynamic);
struct dev_pm_opp *_opp_allocate(struct opp_table *opp_table)
{
struct dev_pm_opp *opp;
- int supply_count, supply_size, icc_size;
+ int supply_count, supply_size, icc_size, clk_size;

/* Allocate space for at least one supply */
supply_count = opp_table->regulator_count > 0 ?
opp_table->regulator_count : 1;
supply_size = sizeof(*opp->supplies) * supply_count;
+ clk_size = sizeof(*opp->rates) * opp_table->clk_count;
icc_size = sizeof(*opp->bandwidth) * opp_table->path_count;

/* allocate new OPP node and supplies structures */
opp = kzalloc(sizeof(*opp) + supply_size + icc_size, GFP_KERNEL);
-
if (!opp)
return NULL;

- /* Put the supplies at the end of the OPP structure as an empty array */
+ /* Put the supplies, bw and clock at the end of the OPP structure */
opp->supplies = (struct dev_pm_opp_supply *)(opp + 1);
+
+ opp->rates = (unsigned long *)(opp->supplies + supply_count);
+
if (icc_size)
- opp->bandwidth = (struct dev_pm_opp_icc_bw *)(opp->supplies + supply_count);
+ opp->bandwidth = (struct dev_pm_opp_icc_bw *)(opp->rates + opp_table->clk_count);
+
INIT_LIST_HEAD(&opp->node);

return opp;
@@ -1648,10 +1659,11 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
* 1: opp1 > opp2
* -1: opp1 < opp2
*/
-int _opp_compare_key(struct dev_pm_opp *opp1, struct dev_pm_opp *opp2)
+int _opp_compare_key(struct opp_table *opp_table, struct dev_pm_opp *opp1,
+ struct dev_pm_opp *opp2)
{
- if (opp1->rate != opp2->rate)
- return opp1->rate < opp2->rate ? -1 : 1;
+ if (opp_table->clk_count == 1 && opp1->rates[0] != opp2->rates[0])
+ return opp1->rates[0] < opp2->rates[0] ? -1 : 1;
if (opp1->bandwidth && opp2->bandwidth &&
opp1->bandwidth[0].peak != opp2->bandwidth[0].peak)
return opp1->bandwidth[0].peak < opp2->bandwidth[0].peak ? -1 : 1;
@@ -1676,7 +1688,7 @@ static int _opp_is_duplicate(struct device *dev, struct dev_pm_opp *new_opp,
* loop.
*/
list_for_each_entry(opp, &opp_table->opp_list, node) {
- opp_cmp = _opp_compare_key(new_opp, opp);
+ opp_cmp = _opp_compare_key(opp_table, new_opp, opp);
if (opp_cmp > 0) {
*head = &opp->node;
continue;
@@ -1687,8 +1699,8 @@ static int _opp_is_duplicate(struct device *dev, struct dev_pm_opp *new_opp,

/* Duplicate OPPs */
dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
- __func__, opp->rate, opp->supplies[0].u_volt,
- opp->available, new_opp->rate,
+ __func__, opp->rates[0], opp->supplies[0].u_volt,
+ opp->available, new_opp->rates[0],
new_opp->supplies[0].u_volt, new_opp->available);

/* Should we compare voltages for all regulators here ? */
@@ -1709,7 +1721,7 @@ void _required_opps_available(struct dev_pm_opp *opp, int count)

opp->available = false;
pr_warn("%s: OPP not supported by required OPP %pOF (%lu)\n",
- __func__, opp->required_opps[i]->np, opp->rate);
+ __func__, opp->required_opps[i]->np, opp->rates[0]);
return;
}
}
@@ -1750,7 +1762,7 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
if (!_opp_supported_by_regulators(new_opp, opp_table)) {
new_opp->available = false;
dev_warn(dev, "%s: OPP not supported by regulators (%lu)\n",
- __func__, new_opp->rate);
+ __func__, new_opp->rates[0]);
}

/* required-opps not fully initialized yet */
@@ -1796,7 +1808,7 @@ int _opp_add_v1(struct opp_table *opp_table, struct device *dev,
return -ENOMEM;

/* populate the opp table */
- new_opp->rate = freq;
+ new_opp->rates[0] = freq;
tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
new_opp->supplies[0].u_volt = u_volt;
new_opp->supplies[0].u_volt_min = u_volt - tol;
@@ -1991,6 +2003,17 @@ static void _opp_put_regulators(struct opp_table *opp_table)
opp_table->regulator_count = -1;
}

+static void _put_clks(struct opp_table *opp_table, int count)
+{
+ int i;
+
+ for (i = count - 1; i >= 0; i--)
+ clk_put(opp_table->clks[i]);
+
+ kfree(opp_table->clks);
+ opp_table->clks = NULL;
+}
+
/**
* _opp_set_clknames() - Set clk names for the device
* @dev: Device for which clk names is being set.
@@ -2005,30 +2028,66 @@ static void _opp_put_regulators(struct opp_table *opp_table)
* This must be called before any OPPs are initialized for the device.
*/
static int _opp_set_clknames(struct opp_table *opp_table, struct device *dev,
- const char * const names[], unsigned int count)
+ const char * const names[], unsigned int count,
+ config_clks_t config_clks)
{
- /* We support only one clock name for now */
- if (count != 1)
+ struct clk *clk;
+ int ret, i;
+
+ /* Fail early for invalid configurations */
+ if (!count || (config_clks && count == 1) || (!config_clks && count > 1))
return -EINVAL;

/* Another CPU that shares the OPP table has set the clkname ? */
- if (opp_table->clk_configured)
+ if (opp_table->clks)
return 0;

- /* clk shouldn't be initialized at this point */
- if (WARN_ON(opp_table->clk))
- return -EBUSY;
+ opp_table->clks = kmalloc_array(count, sizeof(*opp_table->clks),
+ GFP_KERNEL);
+ if (!opp_table->clks)
+ return -ENOMEM;

- /* Find clk for the device */
- opp_table->clk = clk_get(dev, names[0]);
- if (IS_ERR(opp_table->clk)) {
- return dev_err_probe(dev, PTR_ERR(opp_table->clk),
- "%s: Couldn't find clock\n", __func__);
+ /* Find clks for the device */
+ for (i = 0; i < count; i++) {
+ clk = clk_get(dev, names[i]);
+ if (IS_ERR(clk)) {
+ ret = dev_err_probe(dev, PTR_ERR(clk),
+ "%s: Couldn't find clock with name: %s\n",
+ __func__, names[i]);
+ goto free_clks;
+ }
+
+ opp_table->clks[i] = clk;
}

- opp_table->clk_configured = true;
+ opp_table->clk_count = count;
+
+ /* Set generic single clk set here */
+ if (count == 1) {
+ opp_table->config_clks = _opp_config_clk_single;
+
+ /*
+ * We could have just dropped the "clk" field and used "clks"
+ * everywhere. Instead we kept the "clk" field around for
+ * following reasons:
+ *
+ * - avoiding clks[0] everywhere else.
+ * - not running single clk helpers for multiple clk usecase by
+ * mistake.
+ *
+ * Since this is single-clk case, just update the clk pointer
+ * too.
+ */
+ opp_table->clk = opp_table->clks[0];
+ } else {
+ opp_table->config_clks = config_clks;
+ }

return 0;
+
+free_clks:
+ _put_clks(opp_table, i);
+ return ret;
}

/**
@@ -2037,11 +2096,13 @@ static int _opp_set_clknames(struct opp_table *opp_table, struct device *dev,
*/
static void _opp_put_clknames(struct opp_table *opp_table)
{
- if (opp_table->clk_configured) {
- clk_put(opp_table->clk);
- opp_table->clk = ERR_PTR(-EINVAL);
- opp_table->clk_configured = false;
- }
+ if (!opp_table->clks)
+ return;
+
+ opp_table->config_clks = NULL;
+ opp_table->clk = ERR_PTR(-ENODEV);
+
+ _put_clks(opp_table, opp_table->clk_count);
}

/**
@@ -2225,9 +2286,13 @@ struct opp_table *dev_pm_opp_set_config(struct device *dev,
/* Configure clocks */
if (config->clk_names) {
ret = _opp_set_clknames(opp_table, dev, config->clk_names,
- config->clk_count);
+ config->clk_count, config->config_clks);
if (ret)
goto err;
+ } else if (config->config_clks) {
+ /* Don't allow config callback without clocks */
+ ret = -EINVAL;
+ goto err;
}

/* Configure property names */
@@ -2523,7 +2588,7 @@ static int _opp_set_availability(struct device *dev, unsigned long freq,

/* Do we have the frequency? */
list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
- if (tmp_opp->rate == freq) {
+ if (tmp_opp->rates[0] == freq) {
opp = tmp_opp;
break;
}
@@ -2594,7 +2659,7 @@ int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,

/* Do we have the frequency? */
list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
- if (tmp_opp->rate == freq) {
+ if (tmp_opp->rates[0] == freq) {
opp = tmp_opp;
break;
}
diff --git a/drivers/opp/debugfs.c b/drivers/opp/debugfs.c
index 1b6e5c55c3ed..402c507edac7 100644
--- a/drivers/opp/debugfs.c
+++ b/drivers/opp/debugfs.c
@@ -74,6 +74,24 @@ static void opp_debug_create_bw(struct dev_pm_opp *opp,
}
}

+static void opp_debug_create_clks(struct dev_pm_opp *opp,
+ struct opp_table *opp_table,
+ struct dentry *pdentry)
+{
+ char name[12];
+ int i;
+
+ if (opp_table->clk_count == 1) {
+ debugfs_create_ulong("rate_hz", S_IRUGO, pdentry, &opp->rates[0]);
+ return;
+ }
+
+ for (i = 0; i < opp_table->clk_count; i++) {
+ snprintf(name, sizeof(name), "rate_hz_%d", i);
+ debugfs_create_ulong(name, S_IRUGO, pdentry, &opp->rates[i]);
+ }
+}
+
static void opp_debug_create_supplies(struct dev_pm_opp *opp,
struct opp_table *opp_table,
struct dentry *pdentry)
@@ -117,10 +135,11 @@ void opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
* Get directory name for OPP.
*
* - Normally rate is unique to each OPP, use it to get unique opp-name.
- * - For some devices rate isn't available, use index instead.
+ * - For some devices rate isn't available or there are multiple, use
+ * index instead for them.
*/
- if (likely(opp->rate))
- id = opp->rate;
+ if (likely(opp_table->clk_count == 1))
+ id = opp->rates[0];
else
id = _get_opp_count(opp_table);

@@ -134,7 +153,6 @@ void opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
debugfs_create_bool("turbo", S_IRUGO, d, &opp->turbo);
debugfs_create_bool("suspend", S_IRUGO, d, &opp->suspend);
debugfs_create_u32("performance_state", S_IRUGO, d, &opp->pstate);
- debugfs_create_ulong("rate_hz", S_IRUGO, d, &opp->rate);
debugfs_create_u32("level", S_IRUGO, d, &opp->level);
debugfs_create_ulong("clock_latency_ns", S_IRUGO, d,
&opp->clock_latency_ns);
@@ -142,6 +160,7 @@ void opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
opp->of_name = of_node_full_name(opp->np);
debugfs_create_str("of_name", S_IRUGO, d, (char **)&opp->of_name);

+ opp_debug_create_clks(opp, opp_table, d);
opp_debug_create_supplies(opp, opp_table, d);
opp_debug_create_bw(opp, opp_table, d);

diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index 843923ab9d66..ea8fc9e1f7e3 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -767,6 +767,53 @@ void dev_pm_opp_of_remove_table(struct device *dev)
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);

+static int _read_rate(struct dev_pm_opp *new_opp, struct opp_table *opp_table,
+ struct device_node *np)
+{
+ struct property *prop;
+ int i, count, ret;
+ u64 *rates;
+
+ if (!opp_table->clk_count)
+ return 0;
+
+ prop = of_find_property(np, "opp-hz", NULL);
+ if (!prop)
+ return -ENODEV;
+
+ count = prop->length / sizeof(u64);
+ if (opp_table->clk_count != count) {
+ pr_err("%s: Count mismatch between opp-hz and clk_count (%d %d)\n",
+ __func__, count, opp_table->clk_count);
+ return -EINVAL;
+ }
+
+ rates = kmalloc_array(count, sizeof(*rates), GFP_KERNEL);
+ if (!rates)
+ return -ENOMEM;
+
+ ret = of_property_read_u64_array(np, "opp-hz", rates, count);
+ if (ret) {
+ pr_err("%s: Error parsing opp-hz: %d\n", __func__, ret);
+ } else {
+ /*
+ * Rate is defined as an unsigned long in clk API, and so
+ * casting explicitly to its type. Must be fixed once rate is 64
+ * bit guaranteed in clk API.
+ */
+ for (i = 0; i < count; i++) {
+ new_opp->rates[i] = (unsigned long)rates[i];
+
+ /* This will happen for frequencies > 4.29 GHz */
+ WARN_ON(new_opp->rates[i] != rates[i]);
+ }
+ }
+
+ kfree(rates);
+
+ return ret;
+}
+
static int _read_bw(struct dev_pm_opp *new_opp, struct opp_table *opp_table,
struct device_node *np, bool peak)
{
@@ -812,19 +859,13 @@ static int _read_opp_key(struct dev_pm_opp *new_opp,
struct opp_table *opp_table, struct device_node *np)
{
bool found = false;
- u64 rate;
int ret;

- ret = of_property_read_u64(np, "opp-hz", &rate);
- if (!ret) {
- /*
- * Rate is defined as an unsigned long in clk API, and so
- * casting explicitly to its type. Must be fixed once rate is 64
- * bit guaranteed in clk API.
- */
- new_opp->rate = (unsigned long)rate;
+ ret = _read_rate(new_opp, opp_table, np);
+ if (ret)
+ return ret;
+ else if (opp_table->clk_count == 1)
found = true;
- }

/*
* Bandwidth consists of peak and average (optional) values:
@@ -893,8 +934,8 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,

/* Check if the OPP supports hardware's hierarchy of versions or not */
if (!_opp_is_supported(dev, opp_table, np)) {
- dev_dbg(dev, "OPP not supported by hardware: %lu\n",
- new_opp->rate);
+ dev_dbg(dev, "OPP not supported by hardware: %s\n",
+ of_node_full_name(np));
goto free_opp;
}

@@ -945,7 +986,7 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;

pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu level:%u\n",
- __func__, new_opp->turbo, new_opp->rate,
+ __func__, new_opp->turbo, new_opp->rates[0],
new_opp->supplies[0].u_volt, new_opp->supplies[0].u_volt_min,
new_opp->supplies[0].u_volt_max, new_opp->clock_latency_ns,
new_opp->level);
diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
index 131fc7c05db8..d5e8e2bd5e9a 100644
--- a/drivers/opp/opp.h
+++ b/drivers/opp/opp.h
@@ -58,7 +58,7 @@ extern struct list_head opp_tables, lazy_opp_tables;
* @suspend: true if suspend OPP
* @removed: flag indicating that OPP's reference is dropped by OPP core.
* @pstate: Device's power domain's performance state.
- * @rate: Frequency in hertz
+ * @rates: Frequencies in hertz
* @level: Performance level
* @supplies: Power supplies voltage/current values
* @bandwidth: Interconnect bandwidth values
@@ -81,7 +81,7 @@ struct dev_pm_opp {
bool suspend;
bool removed;
unsigned int pstate;
- unsigned long rate;
+ unsigned long *rates;
unsigned int level;

struct dev_pm_opp_supply *supplies;
@@ -149,8 +149,10 @@ enum opp_table_access {
* @supported_hw: Array of version number to support.
* @supported_hw_count: Number of elements in supported_hw array.
* @prop_name: A name to postfix to many DT properties, while parsing them.
- * @clk_configured: Clock name is configured by the platform.
- * @clk: Device's clock handle
+ * @config_clks: Platform specific config_clks() callback.
+ * @clks: Device's clock handles, for multiple clocks.
+ * @clk: Device's clock handle, for single clock.
+ * @clk_count: Number of clocks.
* @config_regulators: Platform specific config_regulators() callback.
* @regulators: Supply regulators
* @regulator_count: Number of power supply regulators. Its value can be -1
@@ -199,8 +201,10 @@ struct opp_table {
unsigned int *supported_hw;
unsigned int supported_hw_count;
const char *prop_name;
- bool clk_configured;
+ config_clks_t config_clks;
+ struct clk **clks;
struct clk *clk;
+ int clk_count;
config_regulators_t config_regulators;
struct regulator **regulators;
int regulator_count;
@@ -225,7 +229,7 @@ struct opp_table *_find_opp_table(struct device *dev);
struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table);
struct dev_pm_opp *_opp_allocate(struct opp_table *opp_table);
void _opp_free(struct dev_pm_opp *opp);
-int _opp_compare_key(struct dev_pm_opp *opp1, struct dev_pm_opp *opp2);
+int _opp_compare_key(struct opp_table *opp_table, struct dev_pm_opp *opp1, struct dev_pm_opp *opp2);
int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table);
int _opp_add_v1(struct opp_table *opp_table, struct device *dev, unsigned long freq, long u_volt, bool dynamic);
void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, int last_cpu);
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 3a81885e976a..74fbb7515128 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -61,10 +61,14 @@ typedef int (*config_regulators_t)(struct device *dev,
struct dev_pm_opp *old_opp, struct dev_pm_opp *new_opp,
struct regulator **regulators, unsigned int count);

+typedef int (*config_clks_t)(struct device *dev, struct opp_table *opp_table,
+ struct dev_pm_opp *opp, void *data, bool scaling_down);
+
/**
* struct dev_pm_opp_config - Device OPP configuration values
* @clk_names: Clk name.
- * @clk_count: Number of clocks, max 1 for now.
+ * @clk_count: Number of clocks.
+ * @config_clks: Custom set clk helper.
* @prop_name: Name to postfix to properties.
* @config_regulators: Custom set regulator helper.
* @supported_hw: Array of hierarchy of versions to match.
@@ -80,6 +84,7 @@ typedef int (*config_regulators_t)(struct device *dev,
struct dev_pm_opp_config {
const char * const *clk_names;
unsigned int clk_count;
+ config_clks_t config_clks;
const char *prop_name;
config_regulators_t config_regulators;
unsigned int *supported_hw;
--
2.31.1.272.g89b43f80a514
\
 
 \ /
  Last update: 2022-06-10 10:26    [W:0.228 / U:4.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site