lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 17/23] dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema
Date
Synopsys AHCI SATA controller is mainly compatible with the generic AHCI
SATA controller except a few peculiarities and the platform environment
requirements. In particular it can have one or two reference clocks to
feed up its AXI/AHB interface and SATA PHYs domain and at least one reset
control for the application clock domain. In addition to that the DMA
interface of each port can be tuned up to work with the predefined maximum
data chunk size. Note unlike generic AHCI controller DWC AHCI can't have
more than 8 ports. All of that is reflected in the new DWC AHCI SATA
device DT binding.

Note the DWC AHCI SATA controller DT-schema has been created in a way so
to be reused for the vendor-specific DT-schemas (see for example the
"snps,dwc-ahci" compatible string binding). One of which we are about to
introduce.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

---

Changelog v2:
- Replace min/max constraints of the snps,{tx,rx}-ts-max property with
enum [ 1, 2, 4, ..., 1024 ]. (@Rob)

Changelog v4:
- Decrease the "additionalProperties" property identation otherwise it's
percieved as the node property instead of the key one. (@Rob)
- Use the ahci-port properties definition from the AHCI common schema
in order to extend it with DWC AHCI SATA port properties. (@Rob)
- Remove the Hannes' rb tag since the patch content has changed.
---
.../bindings/ata/ahci-platform.yaml | 8 --
.../bindings/ata/snps,dwc-ahci.yaml | 129 ++++++++++++++++++
2 files changed, 129 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
index e19cf9828e68..7dc2a2e8f598 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -30,8 +30,6 @@ select:
- marvell,armada-3700-ahci
- marvell,armada-8k-ahci
- marvell,berlin2q-ahci
- - snps,dwc-ahci
- - snps,spear-ahci
required:
- compatible

@@ -48,17 +46,11 @@ properties:
- marvell,berlin2-ahci
- marvell,berlin2q-ahci
- const: generic-ahci
- - items:
- - enum:
- - rockchip,rk3568-dwc-ahci
- - const: snps,dwc-ahci
- enum:
- cavium,octeon-7130-ahci
- hisilicon,hisi-ahci
- ibm,476gtr-ahci
- marvell,armada-3700-ahci
- - snps,dwc-ahci
- - snps,spear-ahci

reg:
minItems: 1
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
new file mode 100644
index 000000000000..af78f6c9b857
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+ This document defines device tree bindings for the Synopsys DWC
+ implementation of the AHCI SATA controller.
+
+allOf:
+ - $ref: ahci-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - description: Synopsys AHCI SATA-compatible devices
+ contains:
+ const: snps,dwc-ahci
+ - description: SPEAr1340 AHCI SATA device
+ const: snps,spear-ahci
+ - description: Rockhip RK3568 ahci controller
+ const: rockchip,rk3568-dwc-ahci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description:
+ Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock
+ and embedded PHYs reference clock together with vendor-specific set
+ of clocks.
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ contains:
+ anyOf:
+ - description: Application AXI/AHB BIU clock source
+ enum:
+ - aclk
+ - sata
+ - description: SATA Ports reference clock
+ enum:
+ - ref
+ - sata_ref
+
+ resets:
+ description:
+ At least basic core and application clock domains reset is normally
+ supported by the DWC AHCI SATA controller. Some platform specific
+ clocks can be also specified though.
+
+ reset-names:
+ contains:
+ description: Core and application clock domains reset control
+ const: arst
+
+patternProperties:
+ "^sata-port@[0-9a-e]$":
+ $ref: '#/$defs/dwc-ahci-port'
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+$defs:
+ dwc-ahci-port:
+ $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 7
+
+ snps,tx-ts-max:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Maximal size of Tx DMA transactions in FIFO words
+ enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+ snps,rx-ts-max:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Maximal size of Rx DMA transactions in FIFO words
+ enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/ata/ahci.h>
+
+ sata@122f0000 {
+ compatible = "snps,dwc-ahci";
+ reg = <0x122F0000 0x1ff>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clock1>, <&clock2>;
+ clock-names = "aclk", "ref";
+
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+
+ ports-implemented = <0x1>;
+
+ sata-port@0 {
+ reg = <0>;
+
+ hba-port-cap = <HBA_PORT_FBSCP>;
+
+ snps,tx-ts-max = <512>;
+ snps,rx-ts-max = <512>;
+ };
+ };
+...
--
2.35.1
\
 
 \ /
  Last update: 2022-06-10 10:21    [W:0.768 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site