lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] thermal: rcar_gen3_thermal: improve logging during probe
Date
When setting up a new board, a plain "Can't register thermal zone"
didn't help me much because the thermal zones in DT were all fine. I
just had a sensor entry too much in the parent TSC node. Reword the
failure/success messages to contain the sensor number to make it easier
to understand which sensor is affected. Example output now:

rcar_gen3_thermal e6198000.thermal: Sensor 0: Loaded 1 trip points
rcar_gen3_thermal e6198000.thermal: Sensor 1: Loaded 1 trip points
rcar_gen3_thermal e6198000.thermal: Sensor 2: Loaded 1 trip points
rcar_gen3_thermal e6198000.thermal: Sensor 3: Can't register thermal zone

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Change since v2:

* don't add plural-'s' at runtime to allow for a greppable string
(Thanks, Niklas!)

drivers/thermal/rcar_gen3_thermal.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index ccdf8a24ddc7..cda7c52f2319 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -511,7 +511,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
&rcar_gen3_tz_of_ops);
if (IS_ERR(zone)) {
- dev_err(dev, "Can't register thermal zone\n");
+ dev_err(dev, "Sensor %u: Can't register thermal zone\n", i);
ret = PTR_ERR(zone);
goto error_unregister;
}
@@ -533,7 +533,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
if (ret < 0)
goto error_unregister;

- dev_info(dev, "TSC%u: Loaded %d trip points\n", i, ret);
+ dev_info(dev, "Sensor %u: Loaded %d trip points\n", i, ret);
}

if (!priv->num_tscs) {
--
2.35.1
\
 
 \ /
  Last update: 2022-06-10 22:06    [W:0.429 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site