lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 5/5] media: rkvdec: Improve error handling
Hey Nicolas,

Tested with: python3 fluster.py run -d GStreamer-H.264-V4L2SL-Gst1.0 -ts JVT-AVC_
V1 -so /tmp/h264_test.csv -f csv -j1

Ran 129/135 tests successfully in 82.280 secs

On 10.06.2022 08:52, Nicolas Dufresne wrote:
>There is two way decode errors can occur. In one case, the ready

s/There is two way decode/There are two ways decoding/


>status is not set and nothing have been written into the destination,

s/nothing have been/nothing has been/

>while in the other case, the buffer is written but may contain a
>certain amount of errors. In order to differentiate these, we set
>the payload for the first case to 0.
>
>Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Sebastian Fricke <sebastian.fricke@collabora.com>

>---
> drivers/staging/media/rkvdec/rkvdec.c | 26 ++++++++++++++++++++++----
> 1 file changed, 22 insertions(+), 4 deletions(-)
>
>diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
>index 7e76f8b72885..27f1f7276dd2 100644
>--- a/drivers/staging/media/rkvdec/rkvdec.c
>+++ b/drivers/staging/media/rkvdec/rkvdec.c
>@@ -954,14 +954,32 @@ static irqreturn_t rkvdec_irq_handler(int irq, void *priv)
> enum vb2_buffer_state state;
> u32 status;
>
>+ ctx = v4l2_m2m_get_curr_priv(rkvdec->m2m_dev);
> status = readl(rkvdec->regs + RKVDEC_REG_INTERRUPT);
>- state = (status & RKVDEC_RDY_STA) ?
>- VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
>+
>+ if (!(status & RKVDEC_RDY_STA)) {
>+ struct vb2_v4l2_buffer *dst_buf = NULL;
>+
>+ if (status & RKVDEC_TIMEOUT_STA)
>+ pr_debug("Decoder stopped due to internal timeout.");
>+ else
>+ pr_debug("Decoder stopped due to internal error.");

(Just personal preference.. I would prefer "due to an internal" over
"due to internal")

>+
>+ /*
>+ * When this happens, the buffer is left unmodified. As it
>+ * contains no meaningful data we mark is a empty.

s/is a empty/it as empty/

The rest looks nice. Thanks.

Greetings,
Sebastian

>+ */
>+ dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
>+ vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
>+ state = VB2_BUF_STATE_ERROR;
>+ } else {
>+ state = VB2_BUF_STATE_DONE;
>+ }
>
> writel(0, rkvdec->regs + RKVDEC_REG_INTERRUPT);
>- ctx = v4l2_m2m_get_curr_priv(rkvdec->m2m_dev);
>
>- if (ctx->coded_fmt_desc->ops->check_error_info)
>+ if (ctx->coded_fmt_desc->ops->check_error_info &&
>+ state == VB2_BUF_STATE_DONE)
> state = ctx->coded_fmt_desc->ops->check_error_info(ctx);
>
> if (cancel_delayed_work(&rkvdec->watchdog_work))
>--
>2.36.1
>

\
 
 \ /
  Last update: 2022-06-10 21:16    [W:0.041 / U:1.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site