lkml.org 
[lkml]   [2022]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi
Date
The Mercury+ AA1 is not a standalone board, rather it's a module
with an Arria 10 SoC. Remove status = "okay" and i2c aliases, as they
are routed to the base board and should be enabled from there.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
---
arch/arm/boot/dts/Makefile | 1 -
...1.dts => socfpga_arria10_mercury_aa1.dtsi} | 28 -------------------
2 files changed, 29 deletions(-)
rename arch/arm/boot/dts/{socfpga_arria10_mercury_aa1.dts => socfpga_arria10_mercury_aa1.dtsi} (84%)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index edfbedaa6168..023c8b4ba45c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1146,7 +1146,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-torbreck.dtb
dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
- socfpga_arria10_mercury_aa1.dtb \
socfpga_arria10_socdk_nand.dtb \
socfpga_arria10_socdk_qspi.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
similarity index 84%
rename from arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
rename to arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
index a75c059b6727..4b21351f2694 100644
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;

#include "socfpga_arria10.dtsi"

@@ -11,8 +10,6 @@ / {
aliases {
ethernet0 = &gmac0;
serial1 = &uart1;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
};

memory@0 {
@@ -43,7 +40,6 @@ &gmac0 {
phy-addr = <0xffffffff>; /* probe for phy addr */

max-frame-size = <3800>;
- status = "okay";

phy-handle = <&phy3>;

@@ -69,22 +65,8 @@ phy3: ethernet-phy@3 {
};
};

-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
&i2c1 {
- status = "okay";
isl12022: isl12022@6f {
- status = "okay";
compatible = "isil,isl12022";
reg = <0x6f>;
};
@@ -92,7 +74,6 @@ isl12022: isl12022@6f {

/* Following mappings are taken from arria10 socdk dts */
&mmc {
- status = "okay";
cap-sd-highspeed;
broken-cd;
bus-width = <4>;
@@ -101,12 +82,3 @@ &mmc {
&osc1 {
clock-frequency = <33330000>;
};
-
-&uart1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- dr_mode = "host";
-};
--
2.36.1.255.ge46751e96f-goog
\
 
 \ /
  Last update: 2022-06-01 17:49    [W:0.805 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site