lkml.org 
[lkml]   [2022]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 03/11] ARM: dts: qcom: sdx65: Add IMEM and PIL info region
    Date
    Add a simple-mfd representing IMEM on SDX65 and define the PIL
    relocation info region, so that post mortem tools will be able to locate
    the loaded remoteproc.

    Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
    ---
    arch/arm/boot/dts/qcom-sdx65.dtsi | 13 +++++++++++++
    1 file changed, 13 insertions(+)

    diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
    index 669721e..10e3226 100644
    --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
    +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
    @@ -395,6 +395,19 @@
    interrupt-controller;
    };

    + imem@1468f000 {
    + compatible = "simple-mfd";
    + reg = <0x1468f000 0x1000>;
    + ranges = <0x0 0x1468f000 0x1000>;
    + #address-cells = <1>;
    + #size-cells = <1>;
    +
    + pil-reloc@94c {
    + compatible = "qcom,pil-reloc-info";
    + reg = <0x94c 0xc8>;
    + };
    + };
    +
    apps_smmu: iommu@15000000 {
    compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
    reg = <0x15000000 0x40000>;
    --
    2.7.4
    \
     
     \ /
      Last update: 2022-06-01 12:47    [W:4.157 / U:0.072 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site