Messages in this thread Patch in this message | | | Subject | [PATCH] dt-bindings: net: adin: Escape a trailing ":" | Date | Wed, 1 Jun 2022 18:28:09 -0700 | From | Palmer Dabbelt <> |
| |
From: Palmer Dabbelt <palmer@rivosinc.com>
1f77204e11f8 ("dt-bindings: net: adin: document phy clock output properties") added a line with a ":" at the end, which is tripping up my attempts to run the DT schema checks due to this being invalid YAML syntax. I get a schema check failure with the following error
ruamel.yaml.scanner.ScannerError: mapping values are not allowed in this context
This just escapes the line in question, so it can parse.
Fixes: 1f77204e11f8 ("dt-bindings: net: adin: document phy clock output properties") Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> --- Documentation/devicetree/bindings/net/adi,adin.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml index 77750df0c2c4..88611720545d 100644 --- a/Documentation/devicetree/bindings/net/adi,adin.yaml +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml @@ -37,7 +37,8 @@ properties: default: 8 adi,phy-output-clock: - description: Select clock output on GP_CLK pin. Two clocks are available: + description: | + Select clock output on GP_CLK pin. Two clocks are available: A 25MHz reference and a free-running 125MHz. The phy can alternatively automatically switch between the reference and the 125MHz clocks based on its internal state. -- 2.34.1
| |