lkml.org 
[lkml]   [2022]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] dt-bindings: power: supply: qcom,pm8941: document usb-charge-current-limit
Date
Document already used (in DTS and by driver) 'usb-charge-current-limit'
property:

arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dtb:
charger@1000: 'usb-charge-current-limit' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/power/supply/qcom,pm8941-charger.yaml | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
index cd6364d65751..cbac55d3cb92 100644
--- a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
@@ -117,6 +117,13 @@ properties:
be done externally to fully comply with the JEITA safety guidelines if this flag
is set.

+ usb-charge-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 2500000
+ description: |
+ Default USB charge current limit in uA.
+
usb-otg-in-supply:
description: Reference to the regulator supplying power to the USB_OTG_IN pin.

--
2.34.1
\
 
 \ /
  Last update: 2022-06-01 09:21    [W:0.220 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site