lkml.org 
[lkml]   [2022]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/11] arm64: dts: qcom: apq8096-db820c: add PM8994 pin function
Date
The bindings require that every pin configuration comes with 'function'
property. Add such to PM8994 GPIO5.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Not tested on hardware.
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index e0e965f4dd2f..ad6780151b4f 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -558,6 +558,7 @@ &pm8994_gpios {
ls_exp_gpio_f: pm8994-gpio5-state {
pinconf {
pins = "gpio5";
+ function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <2>; // PM8994_GPIO_S4, 1.8V
};
--
2.32.0
\
 
 \ /
  Last update: 2022-05-07 21:51    [W:0.188 / U:27.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site