Messages in this thread | | | From | Bjorn Andersson <> | Subject | Re: (subset) [PATCH 1/1] arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP | Date | Fri, 6 May 2022 10:03:04 -0500 |
| |
On Sun, 24 Apr 2022 01:20:03 +0530, Bhupesh Sharma wrote: > Fix the issues seen with ethernet traffic getting stalled on SA8155p-ADP > board with default (or larger) mtu size of 1500 bytes, by disabling > multiple Tx and Rx queues for the stmmac IP block. > > With the single queue setup, the ethernet traffic is stable, > wget / curl can work well on the board and no ethernet stall is > observed even when longer netperf / iperf3 test are run. Also > a performance of ~940 Mbits/sec is observed on the 1G link, so > there is no observable degradation in performance as well. > > [...]
Applied, thanks!
[1/1] arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP commit: 11a3f3dc2cf8d6127aae6183a69dcf3dde026305
Best regards, -- Bjorn Andersson <bjorn.andersson@linaro.org>
| |