lkml.org 
[lkml]   [2022]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/6] dt-bindings: rtc: stm32: add alarm A out property to select output
On Wed, May 04, 2022 at 03:06:13PM +0200, Valentin Caron wrote:
> STM32 RTC can pulse some SOC pins when an alarm of RTC expires.
>
> This patch adds property to activate alarm A output. The pulse can
> output on three pins RTC_OUT1, RTC_OUT2, RTC_OUT2_RMP
> (PC13, PB2, PI8 on stm32mp15) (PC13, PB2, PI1 on stm32mp13).
>
> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
> ---
> .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> index 56d46ea35c5d..71e02604e8de 100644
> --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> @@ -59,6 +59,13 @@ properties:
> Refer to <include/dt-bindings/rtc/rtc-stm32.h> for the supported values.
> Pinctrl state named "default" may be defined to reserve pin for RTC output.
>
> + st,alarm:
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + description: |
> + To select and enable RTC Alarm A output.
> + Refer to <include/dt-bindings/rtc/rtc-stm32.h> for the supported values.

No, sorry, you need to define the allowed values as a schema here.

> + Pinctrl state named "default" may be defined to reserve pin for RTC output.
> +
> allOf:
> - if:
> properties:
> @@ -75,6 +82,9 @@ allOf:
> st,lsco:
> maxItems: 0
>
> + st,alarm:
> + maxItems: 0

st,alarm: false

or:

not:
required: [ st,alarm ]

is how you disallow a property.

This should cause a warning, but this patch didn't apply for me.

> +
> clock-names: false
>
> required:
> @@ -95,6 +105,9 @@ allOf:
> st,lsco:
> maxItems: 0
>
> + st,alarm:
> + maxItems: 0
> +
> required:
> - clock-names
> - st,syscfg
> @@ -117,6 +130,9 @@ allOf:
> st,lsco:
> maxItems: 1
>
> + st,alarm:
> + maxItems: 1

maxItems applies to arrays, but this is a scalar value. I don't think
you need this hunk.

> +
> required:
> - clock-names
>
> @@ -153,8 +169,9 @@ examples:
> clocks = <&rcc RTCAPB>, <&rcc RTC>;
> clock-names = "pclk", "rtc_ck";
> interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + st,alarm = <RTC_OUT1>;
> st,lsco = <RTC_OUT2_RMP>;
> - pinctrl-0 = <&rtc_out2_rmp_pins_a>;
> + pinctrl-0 = <&rtc_out1_pins_a &rtc_out2_rmp_pins_a>;
> pinctrl-names = "default";
> };
>
> --
> 2.25.1
>
>

\
 
 \ /
  Last update: 2022-05-04 17:44    [W:0.174 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site