lkml.org 
[lkml]   [2022]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: pinctrl: mt8192: Switch drive-strength-adv for -microamp
Date
Commit e5fabbe43f3f ("pinctrl: mediatek: paris: Support generic
PIN_CONFIG_DRIVE_STRENGTH_UA") added support for using
drive-strength-microamp instead of mediatek,drive-strength-adv.

Since there aren't any users of mediatek,drive-strength-adv on mt8192
yet, remove this property and add drive-strength-microamp in its place,
which has a clearer meaning.

While at it, add a new 'if' block to validate that drive-strength and
drive-strength-microamp aren't used together, since they're mutually
exclusive.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogiocchino.delregno@collabora.com>

---

Changes in v2:
- Added 'if' block to make drive-strength and drive-strength-microamp
mutually exclusive
- Changed commit title to be more precise
- Dropped Fixes tag

.../bindings/pinctrl/pinctrl-mt8192.yaml | 35 ++++++-------------
1 file changed, 10 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
index c90a132fbc79..c8092b218f2f 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
@@ -80,31 +80,8 @@ patternProperties:
dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
enum: [2, 4, 6, 8, 10, 12, 14, 16]

- mediatek,drive-strength-adv:
- description: |
- Describe the specific driving setup property.
- For I2C pins, the existing generic driving setup can only support
- 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
- can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
- driving setup, the existing generic setup will be disabled.
- The specific driving setup is controlled by E1E0EN.
- When E1=0/E0=0, the strength is 0.125mA.
- When E1=0/E0=1, the strength is 0.25mA.
- When E1=1/E0=0, the strength is 0.5mA.
- When E1=1/E0=1, the strength is 1mA.
- EN is used to enable or disable the specific driving setup.
- Valid arguments are described as below:
- 0: (E1, E0, EN) = (0, 0, 0)
- 1: (E1, E0, EN) = (0, 0, 1)
- 2: (E1, E0, EN) = (0, 1, 0)
- 3: (E1, E0, EN) = (0, 1, 1)
- 4: (E1, E0, EN) = (1, 0, 0)
- 5: (E1, E0, EN) = (1, 0, 1)
- 6: (E1, E0, EN) = (1, 1, 0)
- 7: (E1, E0, EN) = (1, 1, 1)
- So the valid arguments are from 0 to 7.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]

mediatek,pull-up-adv:
description: |
@@ -138,6 +115,14 @@ patternProperties:
required:
- pinmux

+ allOf:
+ - if:
+ required:
+ - drive-strength-microamp
+ then:
+ properties:
+ drive-strength: false
+
additionalProperties: false

allOf:
--
2.36.1
\
 
 \ /
  Last update: 2022-06-01 00:20    [W:0.066 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site