lkml.org 
[lkml]   [2022]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH -next v7 2/3] block, bfq: refactor the counting of 'num_groups_with_pending_reqs'
On Tue 31-05-22 17:33:25, Yu Kuai wrote:
> 在 2022/05/31 17:19, Paolo Valente 写道:
> > > Il giorno 31 mag 2022, alle ore 11:06, Yu Kuai <yukuai3@huawei.com> ha scritto:
> > >
> > > 在 2022/05/31 16:36, Paolo VALENTE 写道:
> > > > > Il giorno 30 mag 2022, alle ore 10:40, Yu Kuai <yukuai3@huawei.com> ha scritto:
> > > > >
> > > > > 在 2022/05/30 16:34, Yu Kuai 写道:
> > > > > > 在 2022/05/30 16:10, Paolo Valente 写道:
> > > > > > >
> > > > > > >
> > > > > > > > Il giorno 28 mag 2022, alle ore 11:50, Yu Kuai <yukuai3@huawei.com> ha scritto:
> > > > > > > >
> > > > > > > > Currently, bfq can't handle sync io concurrently as long as they
> > > > > > > > are not issued from root group. This is because
> > > > > > > > 'bfqd->num_groups_with_pending_reqs > 0' is always true in
> > > > > > > > bfq_asymmetric_scenario().
> > > > > > > >
> > > > > > > > The way that bfqg is counted into 'num_groups_with_pending_reqs':
> > > > > > > >
> > > > > > > > Before this patch:
> > > > > > > > 1) root group will never be counted.
> > > > > > > > 2) Count if bfqg or it's child bfqgs have pending requests.
> > > > > > > > 3) Don't count if bfqg and it's child bfqgs complete all the requests.
> > > > > > > >
> > > > > > > > After this patch:
> > > > > > > > 1) root group is counted.
> > > > > > > > 2) Count if bfqg have at least one bfqq that is marked busy.
> > > > > > > > 3) Don't count if bfqg doesn't have any busy bfqqs.
> > > > > > >
> > > > > > > Unfortunately, I see a last problem here. I see a double change:
> > > > > > > (1) a bfqg is now counted only as a function of the state of its child
> > > > > > > queues, and not of also its child bfqgs
> > > > > > > (2) the state considered for counting a bfqg moves from having pending
> > > > > > > requests to having busy queues
> > > > > > >
> > > > > > > I'm ok with with (1), which is a good catch (you are lady explained
> > > > > > > the idea to me some time ago IIRC).
> > > > > > >
> > > > > > > Yet I fear that (2) is not ok. A bfqq can become non busy even if it
> > > > > > > still has in-flight I/O, i.e. I/O being served in the drive. The
> > > > > > > weight of such a bfqq must still be considered in the weights_tree,
> > > > > > > and the group containing such a queue must still be counted when
> > > > > > > checking whether the scenario is asymmetric. Otherwise service
> > > > > > > guarantees are broken. The reason is that, if a scenario is deemed as
> > > > > > > symmetric because in-flight I/O is not taken into account, then idling
> > > > > > > will not be performed to protect some bfqq, and in-flight I/O may
> > > > > > > steal bandwidth to that bfqq in an uncontrolled way.
> > > > > > Hi, Paolo
> > > > > > Thanks for your explanation.
> > > > > > My orginal thoughts was using weights_tree insertion/removal, however,
> > > > > > Jan convinced me that using bfq_add/del_bfqq_busy() is ok.
> > > > > > From what I see, when bfqq dispatch the last request,
> > > > > > bfq_del_bfqq_busy() will not be called from __bfq_bfqq_expire() if
> > > > > > idling is needed, and it will delayed to when such bfqq get scheduled as
> > > > > > in-service queue again. Which means the weight of such bfqq should still
> > > > > > be considered in the weights_tree.
> > > > > > I also run some tests on null_blk with "irqmode=2
> > > > > > completion_nsec=100000000(100ms) hw_queue_depth=1", and tests show
> > > > > > that service guarantees are still preserved on slow device.
> > > > > > Do you this is strong enough to cover your concern?
> > > > Unfortunately it is not. Your very argument is what made be believe
> > > > that considering busy queues was enough, in the first place. But, as
> > > > I found out, the problem is caused by the queues that do not enjoy
> > > > idling. With your patch (as well as in my initial version) they are
> > > > not counted when they remain without requests queued. And this makes
> > > > asymmetric scenarios be considered erroneously as symmetric. The
> > > > consequence is that idling gets switched off when it had to be kept
> > > > on, and control on bandwidth is lost for the victim in-service queues.
> > >
> > > Hi,Paolo
> > >
> > > Thanks for your explanation, are you thinking that if bfqq doesn't enjoy
> > > idling, then such bfqq will clear busy after dispatching the last
> > > request?
> > >
> > > Please kindly correct me if I'm wrong in the following process:
> > >
> > > If there are more than one bfqg that is activatied, then bfqqs that are
> > > not enjoying idle are still left busy after dispatching the last
> > > request.
> > >
> > > details in __bfq_bfqq_expire:
> > >
> > > if (RB_EMPTY_ROOT(&bfqq->sort_list) &&
> > > ┊ !(reason == BFQQE_PREEMPTED &&
> > > ┊ idling_needed_for_service_guarantees(bfqd, bfqq))) {
> > > -> idling_needed_for_service_guarantees will always return true,
> >
> > It returns true only is the scenario is symmetric. Not counting bfqqs
> > with in-flight requests makes an asymmetric scenario be considered
> > wrongly symmetric. See function bfq_asymmetric_scenario().
>
> Hi, Paolo
>
> Do you mean this gap?
>
> 1. io1 is issued from bfqq1(from bfqg1)
> 2. bfqq1 dispatched this io, it's busy is cleared
> 3. *before io1 is completed*, io2 is issued from bfqq2(bfqg2)

Yes. So as far as I understand Paolo is concerned about this scenario.

> 4. with this patchset, while dispatching io2 from bfqq2, the scenario
> should be symmetric while it's considered wrongly asymmetric.

But with this patchset, we will consider this scenario symmetric because at
any point in time there is only one busy bfqq. Before, we considered this
scenario asymmetric because two different bfq groups have bfqq in their
weights_tree. So before this patchset
idling_needed_for_service_guarantees() returned true, after this patchset
the function returns false so we won't idle anymore and Paolo argues that
bfqq1 does not get adequate protection from bfqq2 as a result.

I agree with Paolo this seems possible. The fix is relatively simple though
- instead of changing how weights_tree is used for weight raised queues as
you did originally, I'd move the accounting of groups with pending requests
to bfq_add/del_bfqq_busy() and bfq_completed_request().

Honza
--
Jan Kara <jack@suse.com>
SUSE Labs, CR

\
 
 \ /
  Last update: 2022-05-31 12:02    [W:0.132 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site