lkml.org 
[lkml]   [2022]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.17 007/135] ath11k: Change max no of active probe SSID and BSSID to fw capability
Date
From: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>

[ Upstream commit 50dc9ce9f80554a88e33b73c30851acf2be36ed3 ]

The maximum number of SSIDs in a for active probe requests is currently
reported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver.
The scan_req_params structure only has the capacity to hold 10 SSIDs.
This leads to a buffer overflow which can be triggered from
wpa_supplicant in userspace. When copying the SSIDs into the
scan_req_params structure in the ath11k_mac_op_hw_scan route, it can
overwrite the extraie pointer.

Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe
request will be sent, so totally 64 probe requests supported. So
set both max ssid and bssid to 16 and 4 respectively. Remove the
redundant macros of ssid and bssid.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220329150221.21907-1-quic_kathirve@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath11k/wmi.h | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 2f26ec1a8aa3..8173570975e4 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -3087,9 +3087,6 @@ enum scan_dwelltime_adaptive_mode {
SCAN_DWELL_MODE_STATIC = 4
};

-#define WLAN_SCAN_MAX_NUM_SSID 10
-#define WLAN_SCAN_MAX_NUM_BSSID 10
-
#define WLAN_SSID_MAX_LEN 32

struct element_info {
@@ -3104,7 +3101,6 @@ struct wlan_ssid {

#define WMI_IE_BITMAP_SIZE 8

-#define WMI_SCAN_MAX_NUM_SSID 0x0A
/* prefix used by scan requestor ids on the host */
#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000

@@ -3112,10 +3108,6 @@ struct wlan_ssid {
/* host cycles through the lower 12 bits to generate ids */
#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000

-#define WLAN_SCAN_PARAMS_MAX_SSID 16
-#define WLAN_SCAN_PARAMS_MAX_BSSID 4
-#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
-
/* Values lower than this may be refused by some firmware revisions with a scan
* completion with a timedout reason.
*/
@@ -3311,8 +3303,8 @@ struct scan_req_params {
u32 n_probes;
u32 *chan_list;
u32 notify_scan_events;
- struct wlan_ssid ssid[WLAN_SCAN_MAX_NUM_SSID];
- struct wmi_mac_addr bssid_list[WLAN_SCAN_MAX_NUM_BSSID];
+ struct wlan_ssid ssid[WLAN_SCAN_PARAMS_MAX_SSID];
+ struct wmi_mac_addr bssid_list[WLAN_SCAN_PARAMS_MAX_BSSID];
struct element_info extraie;
struct element_info htcap;
struct element_info vhtcap;
--
2.35.1
\
 
 \ /
  Last update: 2022-05-30 15:49    [W:0.593 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site