lkml.org 
[lkml]   [2022]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] dt-bindings: net: cavium-mdio.txt: add clock-frequency attribute
Date
Add support to configure MDIO clock frequency via DTS

Signed-off-by: Damian Eppel <deppel@marvell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
---
Documentation/devicetree/bindings/net/cavium-mdio.txt | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/cavium-mdio.txt b/Documentation/devicetree/bindings/net/cavium-mdio.txt
index 020df08b8a30f4df80766bb90e100ae6210a777b..638c341966a80823b9eb2f33b947f38110907cc1 100644
--- a/Documentation/devicetree/bindings/net/cavium-mdio.txt
+++ b/Documentation/devicetree/bindings/net/cavium-mdio.txt
@@ -41,6 +41,9 @@ Properties:

- reg: The PCI device and function numbers of the nexus device.

+- clock-frequency: MDIO bus clock frequency in Hz. It defaults to 3.125 MHz and
+ and not to standard 2.5 MHz for Marvell Octeon family.
+
- #address-cells: Must be <2>.

- #size-cells: Must be <2>.
@@ -64,6 +67,7 @@ Example:
#address-cells = <1>;
#size-cells = <0>;
reg = <0x87e0 0x05003800 0x0 0x30>;
+ clock-frequency = <3125000>;

ethernet-phy@0 {
...
@@ -75,6 +79,7 @@ Example:
#address-cells = <1>;
#size-cells = <0>;
reg = <0x87e0 0x05003880 0x0 0x30>;
+ clock-frequency = <3125000>;

ethernet-phy@0 {
...
--
2.17.1
\
 
 \ /
  Last update: 2022-05-30 14:58    [W:0.157 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site