lkml.org 
[lkml]   [2022]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH v1 00/19] Introduce Nuvoton Arbel NPCM8XX BMC SoC
    On Mon, May 23, 2022 at 1:59 PM Arnd Bergmann <arnd@arndb.de> wrote:
    >
    > On Sun, May 22, 2022 at 5:50 PM Tomer Maimon <tmaimon77@gmail.com> wrote:
    > >
    > > This patchset adds initial support for the Nuvoton
    > > Arbel NPCM8XX Board Management controller (BMC) SoC family.
    > >
    > > The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
    > > The NPCM8XX computing subsystem comprises a quadcore ARM
    > > Cortex A35 ARM-V8 architecture.
    > >
    > > This patchset adds minimal architecture and drivers such as:
    > > Clocksource, Clock, Reset, and WD.
    > >
    > > Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
    > >
    > > This patchset was tested on the Arbel NPCM8XX evaluation board.
    >
    > Thanks for your submission. Please note a few things about the process here:
    >
    > - The merge window is currently open, which means a lo

    Something wrong with the script?

    > Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
    >
    > This patchset was tested on the Arbel NPCM8XX evaluation board.
    >
    > Tomer Maimon (19):
    > dt-bindings: timer: npcm: Add npcm845 compatible string
    > clocksource: timer-npcm7xx: Add NPCM845 timer support
    > dt-bindings: serial: 8250: Add npcm845 compatible string
    > tty: serial: 8250: Add NPCM845 UART support
    > dt-bindings: watchdog: npcm: Add npcm845 compatible string
    > watchdog: npcm_wdt: Add NPCM845 watchdog support
    > dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
    > clk: npcm8xx: add clock controller
    > dt-bindings: reset: add syscon property
    > reset: npcm: using syscon instead of device data
    > dt-bindings: reset: npcm: Add support for NPCM8XX
    > reset: npcm: Add NPCM8XX support
    > dt-bindings: arm: npcm: Add maintainer
    > dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
    > dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
    > arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
    > arm64: dts: nuvoton: Add initial NPCM8XX device tree
    > arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
    > arm64: defconfig: Add Nuvoton NPCM family supportt of maintainers
    > won't be reviewing your patches at the moment. It may be better to wait
    > for the -rc1 to be out before sending out v2
    >
    > - don't send your patches to soc@kernel.org unless you want me to pick
    > them up into the soc tree and they have been reviewed already. The series
    > is clearly still under review at the moment, and I expect it to go through
    > a few revisions first.
    >
    > - gmail marked your emails as possible spam for me. I don't know what
    > happened here, but you may want to look into this to ensure that
    > everybody receives it.
    >
    > Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
    >
    > This patchset was tested on the Arbel NPCM8XX evaluation board.
    >
    > Tomer Maimon (19):
    > dt-bindings: timer: npcm: Add npcm845 compatible string
    > clocksource: timer-npcm7xx: Add NPCM845 timer support
    > dt-bindings: serial: 8250: Add npcm845 compatible string
    > tty: serial: 8250: Add NPCM845 UART support
    > dt-bindings: watchdog: npcm: Add npcm845 compatible string
    > watchdog: npcm_wdt: Add NPCM845 watchdog support
    > dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
    > clk: npcm8xx: add clock controller
    > dt-bindings: reset: add syscon property
    > reset: npcm: using syscon instead of device data
    > dt-bindings: reset: npcm: Add support for NPCM8XX
    > reset: npcm: Add NPCM8XX support
    > dt-bindings: arm: npcm: Add maintainer
    > dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
    > dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
    > arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
    > arm64: dts: nuvoton: Add initial NPCM8XX device tree
    > arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
    > arm64: defconfig: Add Nuvoton NPCM family support
    >
    > - For an initial platform submission, I can merge the
    > clk/clocksource/serial/reset drivers along with the platform if they
    > have an Ack from the subsystem maintainers. I would normally
    > not include the watchdog patch in this as it's not essential, but
    > I suppose that it's fine if you only do a oneline change and it
    > has an Ack. If you have other nonessential drivers that need changes,
    > best submit them separately though.
    >
    > Arnd



    --
    With Best Regards,
    Andy Shevchenko

    \
     
     \ /
      Last update: 2022-05-30 14:25    [W:4.163 / U:0.460 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site