lkml.org 
[lkml]   [2022]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] drm/panel: simple: add ETML0700Y5DHA panel
Date
Add support for the 1024x600 LVDS panel.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4a2e580a2f7b..a5ccdf160dc7 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1685,6 +1685,32 @@ static const struct panel_desc edt_etm0700g0bdh6 = {
.connector_type = DRM_MODE_CONNECTOR_DPI,
};

+static const struct display_timing edt_etml0700y5dha_timing = {
+ .pixelclock = { 40800000, 51200000, 67200000 },
+ .hactive = { 1024, 1024, 1024 },
+ .hfront_porch = { 30, 106, 125 },
+ .hback_porch = { 30, 106, 125 },
+ .hsync_len = { 30, 108, 126 },
+ .vactive = { 600, 600, 600 },
+ .vfront_porch = { 3, 12, 67},
+ .vback_porch = { 3, 12, 67 },
+ .vsync_len = { 4, 11, 66 },
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc edt_etml0700y5dha = {
+ .timings = &edt_etml0700y5dha_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 155,
+ .height = 86,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
static const struct drm_display_mode edt_etmv570g2dhu_mode = {
.clock = 25175,
.hdisplay = 640,
@@ -3868,6 +3894,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,etm0700g0edh6",
.data = &edt_etm0700g0bdh6,
+ }, {
+ .compatible = "edt,etml0700y5dha",
+ .data = &edt_etml0700y5dha,
}, {
.compatible = "edt,etmv570g2dhu",
.data = &edt_etmv570g2dhu,
--
2.30.2
\
 
 \ /
  Last update: 2022-05-30 14:24    [W:0.066 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site