lkml.org 
[lkml]   [2022]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/3] Enable RPi header on j721e sk
Date
The following series of patches enables RPi header
on j721e sk. It is a 40 pin io expasion header which
brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v4:
- Correct the node name in dt binding example

v3:
- Change node name from clock to clock-controller
- Add correct description for clock-controller node

v2:
- Add full path for clock property $ref
- Remove the discription for clock pattern property,
since $ref is added
- Remove the label in the example
- Fix the indentation in the example

Rahul T R (1):
dt-bindings: mfd: ti,j721e-system-controller: Add clock property

Sinthu Raja (1):
arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

Vijay Pothukuchi (1):
arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs

.../mfd/ti,j721e-system-controller.yaml | 12 +++
.../dts/ti/k3-j721e-common-proc-board.dts | 24 +++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 62 ++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 101 +++++++++++++++++-
4 files changed, 193 insertions(+), 6 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2022-05-30 12:12    [W:0.281 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site