lkml.org 
[lkml]   [2022]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v10 1/4] gpu: drm: separate panel orientation property creating and value setting
From
Hi,

On 5/30/22 10:57, Hans de Goede wrote:
> Hi,
>
> On 5/30/22 10:19, Hsin-Yi Wang wrote:
>> drm_dev_register() sets connector->registration_state to
>> DRM_CONNECTOR_REGISTERED and dev->registered to true. If
>> drm_connector_set_panel_orientation() is first called after
>> drm_dev_register(), it will fail several checks and results in following
>> warning.
>>
>> Add a function to create panel orientation property and set default value
>> to UNKNOWN, so drivers can call this function to init the property earlier
>> , and let the panel set the real value later.
>>
>> [ 4.480976] ------------[ cut here ]------------
>> [ 4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
>> <snip>
>> [ 4.609772] Call trace:
>> [ 4.612208] __drm_mode_object_add+0xb4/0xbc
>> [ 4.616466] drm_mode_object_add+0x20/0x2c
>> [ 4.620552] drm_property_create+0xdc/0x174
>> [ 4.624723] drm_property_create_enum+0x34/0x98
>> [ 4.629241] drm_connector_set_panel_orientation+0x64/0xa0
>> [ 4.634716] boe_panel_get_modes+0x88/0xd8
>> [ 4.638802] drm_panel_get_modes+0x2c/0x48
>> [ 4.642887] panel_bridge_get_modes+0x1c/0x28
>> [ 4.647233] drm_bridge_connector_get_modes+0xa0/0xd4
>> [ 4.652273] drm_helper_probe_single_connector_modes+0x218/0x700
>> [ 4.658266] drm_mode_getconnector+0x1b4/0x45c
>> [ 4.662699] drm_ioctl_kernel+0xac/0x128
>> [ 4.666611] drm_ioctl+0x268/0x410
>> [ 4.670002] drm_compat_ioctl+0xdc/0xf0
>> [ 4.673829] __arm64_compat_sys_ioctl+0xc8/0x100
>> [ 4.678436] el0_svc_common+0xf4/0x1c0
>> [ 4.682174] do_el0_svc_compat+0x28/0x3c
>> [ 4.686088] el0_svc_compat+0x10/0x1c
>> [ 4.689738] el0_sync_compat_handler+0xa8/0xcc
>> [ 4.694171] el0_sync_compat+0x178/0x180
>> [ 4.698082] ---[ end trace b4f2db9d9c88610b ]---
>> [ 4.702721] ------------[ cut here ]------------
>> [ 4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
>> <snip>
>> [ 4.833830] Call trace:
>> [ 4.836266] drm_object_attach_property+0x48/0xb8
>> [ 4.840958] drm_connector_set_panel_orientation+0x84/0xa0
>> [ 4.846432] boe_panel_get_modes+0x88/0xd8
>> [ 4.850516] drm_panel_get_modes+0x2c/0x48
>> [ 4.854600] panel_bridge_get_modes+0x1c/0x28
>> [ 4.858946] drm_bridge_connector_get_modes+0xa0/0xd4
>> [ 4.863984] drm_helper_probe_single_connector_modes+0x218/0x700
>> [ 4.869978] drm_mode_getconnector+0x1b4/0x45c
>> [ 4.874410] drm_ioctl_kernel+0xac/0x128
>> [ 4.878320] drm_ioctl+0x268/0x410
>> [ 4.881711] drm_compat_ioctl+0xdc/0xf0
>> [ 4.885536] __arm64_compat_sys_ioctl+0xc8/0x100
>> [ 4.890142] el0_svc_common+0xf4/0x1c0
>> [ 4.893879] do_el0_svc_compat+0x28/0x3c
>> [ 4.897791] el0_svc_compat+0x10/0x1c
>> [ 4.901441] el0_sync_compat_handler+0xa8/0xcc
>> [ 4.905873] el0_sync_compat+0x178/0x180
>> [ 4.909783] ---[ end trace b4f2db9d9c88610c ]---
>>
>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
>> Reviewed-by: Sean Paul <seanpaul@chromium.org>
>> ---
>> v9->v10: rebase to latest linux-next.
>> v9: https://patchwork.kernel.org/project/linux-mediatek/patch/20220318074825.3359978-2-hsinyi@chromium.org/
>> v8: https://patchwork.kernel.org/project/linux-mediatek/patch/20220208084234.1684930-1-hsinyi@chromium.org/
>> v7: https://patchwork.kernel.org/project/linux-mediatek/patch/20220208073714.1540390-1-hsinyi@chromium.org/
>> ---
>> drivers/gpu/drm/drm_connector.c | 58 +++++++++++++++++++++++++--------
>> include/drm/drm_connector.h | 2 ++
>> 2 files changed, 47 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
>> index 1c48d162c77e..d68cc78f6684 100644
>> --- a/drivers/gpu/drm/drm_connector.c
>> +++ b/drivers/gpu/drm/drm_connector.c
>> @@ -1252,7 +1252,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
>> * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
>> * coordinates, so if userspace rotates the picture to adjust for
>> * the orientation it must also apply the same transformation to the
>> - * touchscreen input coordinates. This property is initialized by calling
>> + * touchscreen input coordinates. This property value is set by calling
>> * drm_connector_set_panel_orientation() or
>> * drm_connector_set_panel_orientation_with_quirk()
>> *
>> @@ -2310,8 +2310,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
>> * @connector: connector for which to set the panel-orientation property.
>> * @panel_orientation: drm_panel_orientation value to set
>> *
>> - * This function sets the connector's panel_orientation and attaches
>> - * a "panel orientation" property to the connector.
>> + * This function sets the connector's panel_orientation value. If the property
>> + * doesn't exist, it will try to create one.
>> *
>> * Calling this function on a connector where the panel_orientation has
>> * already been set is a no-op (e.g. the orientation has been overridden with
>> @@ -2343,18 +2343,13 @@ int drm_connector_set_panel_orientation(
>>
>> prop = dev->mode_config.panel_orientation_property;
>> if (!prop) {
>> - prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
>> - "panel orientation",
>> - drm_panel_orientation_enum_list,
>> - ARRAY_SIZE(drm_panel_orientation_enum_list));
>> - if (!prop)
>> + if (drm_connector_init_panel_orientation_property(connector) < 0)
>> return -ENOMEM;
>> -
>> - dev->mode_config.panel_orientation_property = prop;
>> + prop = dev->mode_config.panel_orientation_property;
>> }
>>
>> - drm_object_attach_property(&connector->base, prop,
>> - info->panel_orientation);
>> + drm_object_property_set_value(&connector->base, prop,
>> + info->panel_orientation);
>> return 0;
>> }
>> EXPORT_SYMBOL(drm_connector_set_panel_orientation);
>> @@ -2362,7 +2357,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);
>> /**
>> * drm_connector_set_panel_orientation_with_quirk - set the
>> * connector's panel_orientation after checking for quirks
>> - * @connector: connector for which to init the panel-orientation property.
>> + * @connector: connector for which to set the panel-orientation property.
>> * @panel_orientation: drm_panel_orientation value to set
>> * @width: width in pixels of the panel, used for panel quirk detection
>> * @height: height in pixels of the panel, used for panel quirk detection
>> @@ -2389,6 +2384,43 @@ int drm_connector_set_panel_orientation_with_quirk(
>> }
>> EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
>>
>> +/**
>> + * drm_connector_init_panel_orientation_property -
>> + * create the connector's panel orientation property
>> + *
>> + * This function attaches a "panel orientation" property to the connector
>> + * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
>> + *
>> + * The value of the property can be set by drm_connector_set_panel_orientation()
>> + * or drm_connector_set_panel_orientation_with_quirk() later.
>> + *
>> + * Returns:
>> + * Zero on success, negative errno on failure.
>> + */
>> +int drm_connector_init_panel_orientation_property(
>> + struct drm_connector *connector)
>> +{
>> + struct drm_device *dev = connector->dev;
>> + struct drm_property *prop;
>> +
>> + if(dev->mode_config.panel_orientation_property)
>> + return 0;
>> +
>> + prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
>> + "panel orientation",
>> + drm_panel_orientation_enum_list,
>> + ARRAY_SIZE(drm_panel_orientation_enum_list));
>> + if (!prop)
>> + return -ENOMEM;
>> +
>> + dev->mode_config.panel_orientation_property = prop;
>> + drm_object_attach_property(&connector->base, prop,
>> + DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
>
> DRM_MODE_PANEL_ORIENTATION_UNKNOWN is -1 which is not a valid value
> for an enum. IOW when the panel-orientation is DRM_MODE_PANEL_ORIENTATION_UNKNOWN
> then the property should not be created on the drm-connector object at all.

p.s. note that the original drm_connector_set_panel_orientation() avoids
ever creating the property when the orientation is unknown because of
this bit of code near the top of the function:

/* Don't attach the property if the orientation is unknown */
if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
return 0;

> Which brings us back to what I said in reply to the coverletter,
> it seems that you have a probe ordering problem here; and fixing that
> issue would make this patch-set unnecessary.

Regards,

Hans


>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
>> +
>> static const struct drm_prop_enum_list privacy_screen_enum[] = {
>> { PRIVACY_SCREEN_DISABLED, "Disabled" },
>> { PRIVACY_SCREEN_ENABLED, "Enabled" },
>> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
>> index 3ac4bf87f257..f0681091c617 100644
>> --- a/include/drm/drm_connector.h
>> +++ b/include/drm/drm_connector.h
>> @@ -1802,6 +1802,8 @@ int drm_connector_set_panel_orientation_with_quirk(
>> struct drm_connector *connector,
>> enum drm_panel_orientation panel_orientation,
>> int width, int height);
>> +int drm_connector_init_panel_orientation_property(
>> + struct drm_connector *connector);
>> int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
>> int min, int max);
>> void drm_connector_create_privacy_screen_properties(struct drm_connector *conn);

\
 
 \ /
  Last update: 2022-05-30 11:02    [W:0.170 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site