lkml.org 
[lkml]   [2022]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] MIPS changes for v5.19
The following changes since commit b2d229d4ddb17db541098b83524d901257e93845:

Linux 5.18-rc3 (2022-04-17 13:57:31 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/ tags/mips_5.19

for you to fetch changes up to 7e4fd16b38923028b01d3dbadf4ca973d885c53e:

MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC (2022-05-26 10:12:11 +0200)

----------------------------------------------------------------
Cleanups and fixes

----------------------------------------------------------------
Aidan MacDonald (1):
mips: dts: ingenic: x1000: Add PWM device tree node

Arınç ÜNAL (3):
mips: dts: ralink: mt7621: add mdio label to mdio-bus
mips: dts: ralink: mt7621: mux phy4 to gmac1 for GB-PC1
mips: dts: ralink: mt7621: remove defining gpio function for pin groups

Christophe JAILLET (2):
MIPS: SGI-IP27: Free some unused memory
MIPS: SGI-IP30: Free some unused memory

Gong Yuanjun (1):
mips: cpc: Fix refcount leak in mips_cpc_default_phys_base

Guenter Roeck (1):
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon

Guilherme G. Piccoli (1):
mips: ip22: Reword PANICED to PANICKED and remove useless header

Guo Zhengkui (1):
MIPS: Sibyte: remove unnecessary return variable

Haowen Bai (1):
MIPS: VR41xx: Drop redundant spinlock initialization

Jason Wang (1):
MIPS: tools: no need to initialise statics to 0

Jim Quinlan (1):
MIPS: bmips: Fix compiler warning observed on W=1 build

Juerg Haefliger (2):
MIPS: loongson32: Kconfig: Remove extra space
MIPS: Kconfig: Fix indentation and add endif comment

Julia Lawall (2):
MIPS: fix typos in comments
MIPS: Octeon: fix typo in comment

Krzysztof Kozlowski (1):
MIPS: dts: align SPI NOR node name with dtschema

Maciej W. Rozycki (3):
MIPS: IP27: Remove incorrect `cpu_has_fpu' override
MIPS: IP30: Remove incorrect `cpu_has_fpu' override
MIPS: Rewrite `csum_tcpudp_nofold' in plain C

Mao Bibo (1):
MIPS: smp: optimization for flush_tlb_mm when exiting

Michael Walle (3):
MIPS: mscc: jaguar2: rename pinctrl nodes
MIPS: mscc: ocelot: rename pinctrl nodes
MIPS: mscc: serval: rename pinctrl nodes

Shida Zhang (1):
MIPS: adding a safety check for cpu_has_fpu

Stijn Tintel (3):
MIPS: Octeon: fix CN6640 hang on XAUI init
MIPS: Octeon: support all interfaces on CN66XX
MIPS: Octeon: add SNIC10E board

Tiezhu Yang (5):
selftests/ftrace: Save kprobe_events to test log
MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC

周琰杰 (Zhou Yanjie) (3):
MIPS: Ingenic: Add PWM nodes for X1830.
MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.

陈学兵 (1):
mips: setup: use strscpy to replace strlcpy

arch/mips/Kconfig | 12 +-
arch/mips/alchemy/common/dbdma.c | 2 +-
arch/mips/bmips/dma.c | 1 +
arch/mips/boot/dts/brcm/bcm97358svmb.dts | 2 +-
arch/mips/boot/dts/brcm/bcm97360svmb.dts | 2 +-
arch/mips/boot/dts/brcm/bcm97425svmb.dts | 2 +-
arch/mips/boot/dts/ingenic/cu1000-neo.dts | 77 +++++++------
arch/mips/boot/dts/ingenic/cu1830-neo.dts | 76 ++++++------
arch/mips/boot/dts/ingenic/x1000.dtsi | 32 ++++++
arch/mips/boot/dts/ingenic/x1830.dtsi | 53 +++++++++
arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 10 +-
arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 10 +-
arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 6 +-
arch/mips/boot/dts/mscc/ocelot.dtsi | 4 +-
arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 6 +-
arch/mips/boot/dts/mscc/serval_common.dtsi | 14 +--
.../dts/ralink/gardena_smart_gateway_mt7688.dts | 2 +-
arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts | 26 ++---
arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 30 ++---
arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
arch/mips/boot/tools/relocs.c | 2 +-
arch/mips/cavium-octeon/executive/cvmx-bootmem.c | 2 +-
.../cavium-octeon/executive/cvmx-helper-xaui.c | 5 +-
arch/mips/cavium-octeon/executive/cvmx-helper.c | 6 +
arch/mips/cavium-octeon/executive/cvmx-pko.c | 2 +-
arch/mips/cavium-octeon/octeon-irq.c | 2 +-
arch/mips/cavium-octeon/octeon-usb.c | 2 +-
arch/mips/configs/cu1000-neo_defconfig | 2 +-
arch/mips/configs/cu1830-neo_defconfig | 2 +-
arch/mips/dec/ioasic-irq.c | 4 +-
arch/mips/dec/setup.c | 2 +-
arch/mips/fw/arc/memory.c | 2 +-
arch/mips/include/asm/checksum.h | 79 ++++++-------
arch/mips/include/asm/cpu-features.h | 3 +
.../include/asm/mach-ip27/cpu-feature-overrides.h | 1 -
.../include/asm/mach-ip30/cpu-feature-overrides.h | 1 -
arch/mips/include/asm/mach-ralink/spaces.h | 2 +
arch/mips/include/asm/octeon/cvmx-bootinfo.h | 2 +
arch/mips/jazz/irq.c | 2 +-
arch/mips/kernel/cmpxchg.c | 2 +-
arch/mips/kernel/cpu-probe.c | 2 +-
arch/mips/kernel/idle.c | 2 +-
arch/mips/kernel/kprobes.c | 36 ++++--
arch/mips/kernel/mips-cpc.c | 1 +
arch/mips/kernel/perf_event_mipsxx.c | 2 +-
arch/mips/kernel/setup.c | 17 ++-
arch/mips/kernel/smp.c | 6 +
arch/mips/kvm/tlb.c | 2 +-
arch/mips/loongson32/Kconfig | 2 +-
arch/mips/mm/fault.c | 6 +-
arch/mips/net/bpf_jit_comp32.c | 2 +-
arch/mips/pci/pcie-octeon.c | 4 +-
arch/mips/pic32/pic32mzda/config.c | 2 +-
arch/mips/sgi-ip22/ip22-reset.c | 11 +-
arch/mips/sgi-ip27/ip27-xtalk.c | 4 +
arch/mips/sgi-ip30/ip30-xtalk.c | 4 +
arch/mips/sibyte/bcm1480/setup.c | 4 +-
arch/mips/tools/loongson3-llsc-check.c | 2 +-
arch/mips/txx9/generic/pci.c | 2 +-
arch/mips/vr41xx/common/cmu.c | 2 -
drivers/platform/mips/cpu_hwmon.c | 127 +++++++--------------
.../ftrace/test.d/kprobe/multiple_kprobes.tc | 2 +
62 files changed, 401 insertions(+), 335 deletions(-)

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]

\
 
 \ /
  Last update: 2022-05-30 10:59    [W:0.046 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site