lkml.org 
[lkml]   [2022]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 00/36] MT8195 and MT8186 IOMMU SUPPORT
From


On 03/05/2022 09:13, Yong Wu wrote:
> This patchset adds MT8195 and MT8186 iommu support.
>
> MT8195 have 3 IOMMU HWs. 2 IOMMU HW is for multimedia, and 1 IOMMU HW is
> for infra-master, like PCIe/USB.
>
> About the 2 MM IOMMU HW, something like this:
>
> IOMMU(VDO) IOMMU(VPP)
> | |
> SMI_COMMON(VDO) SMI_COMMON(VPP)
> --------------- ----------------
> | | ... | | ...
> larb0 larb2 ... larb1 larb3 ...
>
> these two MM IOMMU HW share a pgtable.
>
> About the INFRA IOMMU, it don't have larbs, the master connects the iommu
> directly. It use a independent pgtable.
>
> Also, mt8195 IOMMU bank supports. Normally the IOMMU register size only
> is 0x1000. In this IOMMU HW, the register size is 5 * 0x1000. each 0x1000
> is a bank. the banks' register look like this:
> ----------------------------------------
> |bank0 | bank1 | bank2 | bank3 | bank4|
> ----------------------------------------
> |global |
> |control| null
> |regs |
> -----------------------------------------
> |bank |bank |bank |bank |bank |
> |regs |regs |regs |regs |regs |
> | | | | | |
> -----------------------------------------
> All the banks share some global control registers, and each bank have its
> special bank registers, like pgtable base register, tlb operation registers,
> the fault status registers.
>
> In mt8195, we enable this bank feature for infra iommu, We put PCIe in bank0
> and USB in bank4. they have independent pgtable.
>
> MT8186 is based on MT8195, it just has two patches.
>
> Change note:
> v7: 1) Update the changes from Matthias. like add a new function for readability.
> 2) Add mt8186 into this patchset, It may be helpful for maintainer to apply.

For the whole series:

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

>
> v6: https://lore.kernel.org/linux-iommu/20220407075726.17771-1-yong.wu@mediatek.com/
> Rebase on v5.18-rc1.
>
> v5: https://lore.kernel.org/linux-iommu/20220217113453.13658-1-yong.wu@mediatek.com
> 1) Base on next-20220216
> 2) Remove a patch for kmalloc for protect buffer. keep the kzalloc for it.
> 3) minor fix from AngeloGioacchino, like rename the error label name
> (data_unlock to err_unlock).
> Note, keep the TODO for component compare_of[26/34].
>
> v4: https://lore.kernel.org/linux-iommu/20220125085634.17972-1-yong.wu@mediatek.com/
> 1) Base on v5.16-rc1
> 2) Base on tlb logic 2 patchset, some patches in v3 has already gone
> through that patchset.
> 3) Due to the unreadable union for v1/v2(comment in 26/33 of v3), I
> separate mtk_iommu_data for v1 and v2 totally, then remove mtk_iommu.h.
> please see patch[26/35][27/35].
> 4) add two mutex for the internal data. patch[6/35][7/35].
> 5) add a new flag PM_CLK_AO.
>
> v3: https://lore.kernel.org/linux-mediatek/20210923115840.17813-1-yong.wu@mediatek.com/
> 1) base on v5.15-rc1
> 2) Adjust devlink with smi-common, not use the property(sub-sommon).
> 3) Adjust tlb_flush_all flow,
> a) Fix tlb_flush_all only is supported in bank0.
> b) add tlb-flush-all in the resume callback.
> c) remove the pm status checking in tlb-flush-all.
> The reason are showed in the commit message.
> 4) Allow IOMMU_DOMAIN_UNMANAGED since PCIe VFIO use that.
> 5) Fix a clk warning and a null abort when unbind the iommu driver.
>
> v2: https://lore.kernel.org/linux-mediatek/20210813065324.29220-1-yong.wu@mediatek.com/
> 1) Base on v5.14-rc1.
> 2) Fix build fail for arm32.
> 3) Fix dt-binding issue from Rob.
> 4) Fix the bank issue when tlb flush. v1 always use bank->base.
> 5) adjust devlink with smi-common since the node may be smi-sub-common.
> 6) other changes: like reword some commit message(removing many
> "This patch..."); seperate serveral patches.
>
> v1: https://lore.kernel.org/linux-mediatek/20210630023504.18177-1-yong.wu@mediatek.com/
> Base on v5.13-rc1
>
> Yong Wu (36):
> dt-bindings: mediatek: mt8195: Add binding for MM IOMMU
> dt-bindings: mediatek: mt8195: Add binding for infra IOMMU
> dt-bindings: mediatek: mt8186: Add binding for MM iommu
> iommu/mediatek: Fix 2 HW sharing pgtable issue
> iommu/mediatek: Add list_del in mtk_iommu_remove
> iommu/mediatek: Remove clk_disable in mtk_iommu_remove
> iommu/mediatek: Add mutex for m4u_group and m4u_dom in data
> iommu/mediatek: Add mutex for data in the mtk_iommu_domain
> iommu/mediatek: Adapt sharing and non-sharing pgtable case
> iommu/mediatek: Add 12G~16G support for multi domains
> iommu/mediatek: Add a flag DCM_DISABLE
> iommu/mediatek: Add a flag STD_AXI_MODE
> iommu/mediatek: Remove the granule in the tlb flush
> iommu/mediatek: Always enable output PA over 32bits in isr
> iommu/mediatek: Add SUB_COMMON_3BITS flag
> iommu/mediatek: Add IOMMU_TYPE flag
> iommu/mediatek: Contain MM IOMMU flow with the MM TYPE
> iommu/mediatek: Adjust device link when it is sub-common
> iommu/mediatek: Allow IOMMU_DOMAIN_UNMANAGED for PCIe VFIO
> iommu/mediatek: Add a PM_CLK_AO flag for infra iommu
> iommu/mediatek: Add infra iommu support
> iommu/mediatek: Add PCIe support
> iommu/mediatek: Add mt8195 support
> iommu/mediatek: Only adjust code about register base
> iommu/mediatek: Just move code position in hw_init
> iommu/mediatek: Separate mtk_iommu_data for v1 and v2
> iommu/mediatek: Remove mtk_iommu.h
> iommu/mediatek-v1: Just rename mtk_iommu to mtk_iommu_v1
> iommu/mediatek: Add mtk_iommu_bank_data structure
> iommu/mediatek: Initialise bank HW for each a bank
> iommu/mediatek: Change the domid to iova_region_id
> iommu/mediatek: Get the proper bankid for multi banks
> iommu/mediatek: Initialise/Remove for multi bank dev
> iommu/mediatek: Backup/restore regsiters for multi banks
> iommu/mediatek: mt8195: Enable multi banks for infra iommu
> iommu/mediatek: Add mt8186 iommu support
>
> .../bindings/iommu/mediatek,iommu.yaml | 24 +-
> drivers/iommu/mtk_iommu.c | 974 +++++++++++++-----
> drivers/iommu/mtk_iommu.h | 101 --
> drivers/iommu/mtk_iommu_v1.c | 235 +++--
> .../dt-bindings/memory/mt8186-memory-port.h | 217 ++++
> .../dt-bindings/memory/mt8195-memory-port.h | 408 ++++++++
> include/dt-bindings/memory/mtk-memory-port.h | 2 +
> 7 files changed, 1485 insertions(+), 476 deletions(-)
> delete mode 100644 drivers/iommu/mtk_iommu.h
> create mode 100644 include/dt-bindings/memory/mt8186-memory-port.h
> create mode 100644 include/dt-bindings/memory/mt8195-memory-port.h
>

\
 
 \ /
  Last update: 2022-05-03 17:43    [W:1.308 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site