lkml.org 
[lkml]   [2022]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [V6 0/2] arm64: dts: qcom: Configure CTS pin to bias-bus-hold for bluetooth
Bjorn,

On Thu, Apr 21, 2022 at 8:56 AM Vijaya Krishna Nivarthi
<quic_vnivarth@quicinc.com> wrote:
>
> WLAN rail was leaking power during RBSC/sleep even after turning BT off.
> Change pinctrl configuration to handle same.
>
> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
> ---
> v6: add code comments about how bias-bus-hold could save power
> v5: modify subject to include bluetooth
> v4: modify subject of each patch to indicate what it is applying to
> v3: apply same change to active state and other sc7280*.dts* as well
> v2: used bias-bus-hold as per review comments
> v1: intial patch used bias-disable for sleep pinctrl in sc7280-idp only
> ---
>
> Vijaya Krishna Nivarthi (2):
> arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for
> bluetooth
> arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for
> bluetooth
>
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 18 ++++++++++++------
> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 19 ++++++++++++++-----
> 2 files changed, 26 insertions(+), 11 deletions(-)

If the tree hasn't closed yet, I think these two patches are waiting
to land and ready to go.

Thanks!

-Doug

\
 
 \ /
  Last update: 2022-05-03 17:30    [W:0.107 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site