lkml.org 
[lkml]   [2022]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] irqchip/exiu: Fix acknowledgment of edge triggered interrupts
Date
Currently the EXIU uses the fasteoi interrupt flow that is configured by
it's parent (irq-gic-v3.c). With this flow the only chance to clear the
interrupt request happens during .irq_eoi() and (obviously) this happens
after the interrupt handler has run. EXIU requires edge triggered
interrupts to be acked prior to interrupt handling. Without this we
risk incorrect interrupt dismissal when a new interrupt is delivered
after the handler reads and acknowledges the peripheral but before the
irq_eoi() takes place.

Fix this by clearing the interrupt request from .irq_ack() if we are
configured for edge triggered interrupts. This requires adopting the
fasteoi-ack flow instead of the fasteoi to ensure the ack gets called.

These changes have been tested using the power button on a
Developerbox/SC2A11 combined with some hackery in gpio-keys so I can
play with the different trigger mode [and an mdelay(500) so I can
can check what happens on a double click in both modes].

Fixes: 706cffc1b912 ("irqchip/exiu: Add support for Socionext Synquacer EXIU controller")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
---

Notes:
Changes in v3:
* Optimize exiu_irq_eoi() to avoid unnecessary register read (Marc Z)
* Add comment to exiu_irq_eoi() so future adventurers can better
understand how the EXIU on SC2A11 behaves (Marc Z)
* Remove redundant trigger mode management from exiu_domain_alloc()
(Marc Z)

Changes in v2:

* Switch to dynamic selection of handle_fasteoi_irq and
handle_fasteoi_ack_irq and reintroduce exiu_irq_eoi() since we need
that for level triggered interrupts (Ard B).
* Above changes mean we are no longer using sun6i NMI code as a
template to tidy up the description accordingly.

arch/arm64/Kconfig.platforms | 1 +
drivers/irqchip/irq-sni-exiu.c | 25 ++++++++++++++++++++++---
2 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 30b123cde02c..aaeaf57c8222 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -253,6 +253,7 @@ config ARCH_INTEL_SOCFPGA

config ARCH_SYNQUACER
bool "Socionext SynQuacer SoC Family"
+ select IRQ_FASTEOI_HIERARCHY_HANDLERS

config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
diff --git a/drivers/irqchip/irq-sni-exiu.c b/drivers/irqchip/irq-sni-exiu.c
index abd011fcecf4..c7db617e1a2f 100644
--- a/drivers/irqchip/irq-sni-exiu.c
+++ b/drivers/irqchip/irq-sni-exiu.c
@@ -37,11 +37,26 @@ struct exiu_irq_data {
u32 spi_base;
};

-static void exiu_irq_eoi(struct irq_data *d)
+static void exiu_irq_ack(struct irq_data *d)
{
struct exiu_irq_data *data = irq_data_get_irq_chip_data(d);

writel(BIT(d->hwirq), data->base + EIREQCLR);
+}
+
+static void exiu_irq_eoi(struct irq_data *d)
+{
+ struct exiu_irq_data *data = irq_data_get_irq_chip_data(d);
+
+ /*
+ * Level triggered interrupts are latched and must be cleared during
+ * EOI or the interrupt will be jammed on. Of course if a level
+ * triggered interrupt is still asserted then the write will not clear
+ * the interrupt.
+ */
+ if (irqd_is_level_type(d))
+ writel(BIT(d->hwirq), data->base + EIREQCLR);
+
irq_chip_eoi_parent(d);
}

@@ -91,10 +106,13 @@ static int exiu_irq_set_type(struct irq_data *d, unsigned int type)
writel_relaxed(val, data->base + EILVL);

val = readl_relaxed(data->base + EIEDG);
- if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+ if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH) {
val &= ~BIT(d->hwirq);
- else
+ irq_set_handler_locked(d, handle_fasteoi_irq);
+ } else {
val |= BIT(d->hwirq);
+ irq_set_handler_locked(d, handle_fasteoi_ack_irq);
+ }
writel_relaxed(val, data->base + EIEDG);

writel_relaxed(BIT(d->hwirq), data->base + EIREQCLR);
@@ -104,6 +122,7 @@ static int exiu_irq_set_type(struct irq_data *d, unsigned int type)

static struct irq_chip exiu_irq_chip = {
.name = "EXIU",
+ .irq_ack = exiu_irq_ack,
.irq_eoi = exiu_irq_eoi,
.irq_enable = exiu_irq_enable,
.irq_mask = exiu_irq_mask,
base-commit: b2d229d4ddb17db541098b83524d901257e93845
--
2.35.1

\
 
 \ /
  Last update: 2022-05-03 15:46    [W:0.043 / U:1.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site